North American Turbocoupe Organization



Component Location (newby here)
Rod K Offline
Senior Member
#1
I have a 88 Turbo coupe that was given to me. Apparently we are not getting the relay to pick up that powers the computer. We have looked but without knowing where it is it's like shooting in the dark. Does anyone know where this relay is on an 88? Also, the relay for the fuelpump. It isn't picking up now either, but when we get the computer powered it may pick up.
Thanks
Rod Kiser, '88TC, 5 speed, 5 lug, Cobra 13" front brakes, Mark VII 11 1/4" rear disc brakes, PiMP'n, Bullit wheels, ATR 3" exhaust, Aluminum driveshaft, EDIS, 60 LB injectors, gutted upper & ported lower. NATO Member
Reply

Jeff K Offline
Administrator
#2
FP relay, EEC power relay, main and aux fan relays and AC clutch relay are all in the IRCM (integrated relay control module), the black box on the front of the pass side strut tower. Has a 30 pin electrical connector on it, and a bunch of thick wires going to it.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 21 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 02 Taurus Vulcan(wifes car)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB