| #7 |
AH CRAP! So now what do I do! I am stuck back at the same place I was. SHOOT! So the 8.8 axles from the turbo coupe will work ,but I have to knock off the exciter ring, right? As for the backing plates they should swap, right? I am not sure which drums I have, I cant remember for sure. Which ones do I need, and what vehicle did they come from? I know the 7.5 axle was replaced before but I am not sure exactly with what year rear. Thanks for your guys help.
sctur601
------------------
1983 turbo coupe, K&N cone filter, full 3" exhaust magnaflow muffler no cat, Dawes boost controler, Audi front mount intercooler, and a 190 pump.
[This message has been edited by sctur601 (edited 04-27-2001).]
sctur601
------------------
1983 turbo coupe, K&N cone filter, full 3" exhaust magnaflow muffler no cat, Dawes boost controler, Audi front mount intercooler, and a 190 pump.
[This message has been edited by sctur601 (edited 04-27-2001).]
My vehicle
1983 Turbo Coupe-
13.83 at 103mph!
273rwhp and 342ftlb at 24 psi with a slipping clutch!
And it still feels slow!
Thanks
Shawn
I also do port work, if you need something ported email me at [email protected]
1983 Turbo Coupe-
13.83 at 103mph!
273rwhp and 342ftlb at 24 psi with a slipping clutch!
And it still feels slow!
Thanks
Shawn
I also do port work, if you need something ported email me at [email protected]