Not B Anymore
|
Joined:
Apr 2001
Nokesville, VA, USA
|
|
Sooooo close, yet so far away. Got the Ranger Roller in tonight and, aside from when I got myself in the eye with brake cleaner, everything was going so smoothly. Until I went to install the followers... I suppose these followers are from the wrong year ranger because where the valve stem fits "in" them is too narrow. So Carlisle is back in flux again. I had planned on getting up and running tonight. So I'll be running around tomorrow looking for followers. Haven't lost hope yet!
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|
RDOG
|
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
Not B Anymore
|
Joined:
Apr 2001
Nokesville, VA, USA
|
|
I definitely have the followers in the second picture of your Ebay listing (the one labelled, "WRONG ROCKERS!!")... bummer
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|
|
|
Some have thinner valve stems. So the groove is thinner. Their are two different part numbers for the rolles. Sorry B. Hope you can get it accomplished.
|
HCOR
|
Joined:
Jul 2009
FOREST HILL MD
|
|
I have a couple sets of the correct rockers, not sure how far you are from me (Forest Hill MD 21050). I am leaving in a few for Carlisle but can leave them out if you want to pick up to get you running for the weekend. let me know
only memories
|
Not B Anymore
|
Joined:
Apr 2001
Nokesville, VA, USA
|
|
Thanks John, but I should have the correct ones here tomorrow. I should be getting on the road about an hour after they get here if nothing else goes wrong.
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|
HCOR
|
Joined:
Jul 2009
FOREST HILL MD
|
|
alright figure I would offer just incase. been here all day, haven;t rub into anyone else yet.
only memories
|
Pete D
|
Joined:
Apr 2001
Northern OH
|
|
We are waiting for you Brian
Pete Dunham
|
BJL
|
Joined:
Apr 2001
Williamstown, New Jersey
|
|
my fault, i packaged up the wrong followers months ago.. should have checked before i sent them out, hopefully the correct one will be arriving at 1030am tomorrow morning
Brian Larkin
88TC 330,000 miles
Slightly Modified
|
|
|
Sounds Good and i like it that people are willing to help. Good Luck and Have a good time at the SHOW B. Gods Speed
|
