North American Turbocoupe Organization



Wiring tuck question..
ZeroRain Offline
Member
#1
So as most of you know, are cars are not shy of wire issues.. I was wanting to clean up the engine bay and maybe make it look better. On my 84 I pretty much had to rebuild the whole left side of the engine harness and man is it messy.. I was looking on ebay and found a stand alone harness.. http://www.ebay.com/itm/Ford-2-3-Turbo-E...4e&vxp=mtr

Sounds like this would replace all the wires on, well most, the left side. What do you think? Worth it? Would it eliminate 90% of the wires? PLease and thanks!

Zero
1987 Turbo Coupe Auto- gone
1991 Sport 5.0 Auto- gone
1996 LX 5.0 5spd- Gone
1989 Super Coupe 5spd- gone
1984 Turbo Coupe 5spd- newest project
Reply

Not B Anymore Offline
Administrator
#2
The Detail Zone (maker of this harness) is a reputable company. I know of a few people who have used this harness for swaps into other cars.

This is their site: http://www.thedetailzone.com/ford%20repl...nesses.htm

This should basically be a direct replacement for your factory harness.
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
Reply

ZeroRain Offline
Member
#3
Looks like the same system. Looks freaking great! Exactly what I wanted to do. I can Pull all the stock wiring, with the exception of some cabin power, out of the engine bay! I just finished the install instructions and it has all the outputs for the fuel pump, gauges, key, sensors.. the whole nine. With this harness you could literally start a 2.3t with three wires. Thanks Brian!

Zero
1987 Turbo Coupe Auto- gone
1991 Sport 5.0 Auto- gone
1996 LX 5.0 5spd- Gone
1989 Super Coupe 5spd- gone
1984 Turbo Coupe 5spd- newest project
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB