North American Turbocoupe Organization



Wiring Diagrams
SK 88 T-Bird Offline
Member
#1
I've looked this site over and over. I need to find engine wiring diagrams for 88 Turbo Coupe for the future. I have a problem now with two wires fused together for the knock sensor and the air charge temp sensor. Unable to re-connect wire to wire because it's difficult to match the existing wire colors. Does anybody know which wires are ground,voltage, or ohms etc... to the knock sensor and air charge temp sensor. I currantly have the knock sensor disconnected. There is a black/yellow wire to the knock sensor fused to a black/yellow wire going to the air charge temp sensor. Are these wires supossed to be fused or not?? Thanks for any help
88TC, T3/T4, .63AR, Walbro 255 pump, Ranger Roller cam, Kirban AFPR, 120 3G ALT, K&N Cone filter, Boost press set to 17PSI, Timing 10deg
Reply

Pete D Offline
Administrator
#2
Check your email.

See this OLD post about possibly getting reprints of the original service manuals.
http://natomessageboard.com/ultimatebb.p...3;t=000008
Pete Dunham


Reply

SK 88 T-Bird Offline
Member
#3
Thank you Pete. This will be very helpful. I came accross this website late last night and wanted to fwd it to you and everybody, which has what you sent me and maybe some other info. You may already have this site, but thought I would send it anyway:
http://www.therangerstation.com/tech_lib...wiring.htm

Thanks again for your time and the info!!
88TC, T3/T4, .63AR, Walbro 255 pump, Ranger Roller cam, Kirban AFPR, 120 3G ALT, K&N Cone filter, Boost press set to 17PSI, Timing 10deg
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB