North American Turbocoupe Organization



Window Regulator Clips
EricEaves Offline
Junior Member
#1
Hey guys! I'm pretty sure I already asked this question, but for the life of me I can't remember what the response was. Where would I go, other than a junkyard, to find OEM replacement or aluminum upgraded Regulator Clips for an 88 TC?
"Failure is simply the opportunity to begin again, this time more intelligently" -Henry Ford
Reply

anasazi4st Offline
Senior Member
#2
(02-08-2020, 07:25 PM)EricEaves Wrote: Hey guys! I'm pretty sure I already asked this question, but for the life of me I can't remember what the response was. Where would I go, other than a junkyard, to find OEM replacement or aluminum upgraded Regulator Clips for an 88 TC?

Not sure what you mean by Window Regulator Clips? Can you be more specific?
Another proud dues-paying member.

1987 Turbo Coupe w/T5OD, 8.8 axle, grey smoke; most options. Got it in 1991 with 41K miles: 3 turbos, 2 heater cores, 3 T5OD full rebuilds, 6 clutches, 1 head gasket, 2 Teves II ABS units, etc. later....
Reply

EricEaves Offline
Junior Member
#3
The cheap brittle plastic clips that hold the glass in the track
"Failure is simply the opportunity to begin again, this time more intelligently" -Henry Ford
Reply

EricEaves Offline
Junior Member
#4
These


Attached Files Image(s)
   
"Failure is simply the opportunity to begin again, this time more intelligently" -Henry Ford
Reply

347BIRD Offline
Member
#5
I USED A 2 PART EPOXY ON MINE AND DIDNT HAVE ANY ISSUES FOR OVER 10 YRS. 2 PART ADHESIVES CAN BE VERY STRONG
1988 Blk T-Bird, 5-spd, Raven int, 3G Alt, K&N conical, Boost controller, ported E6, ported and polished IHI @ 16 psi, 03 Cobra wheels, 255/40/17, 275/40/17, SN95 BBK lowering springs, SN95 Koni struts and shocks, Maximum Motorsports C/C plates, SN95 BMR tubular A-arms, Aluminum driveshaft, LED's, 255 LPH 
Reply

fred k Offline
Senior Member
#6
(02-12-2020, 06:54 PM)EricEaves Wrote: These
Years ago I went to an auto glass store and they sold me a tube of their adhesive.  Put it on the clips and never had a problem after that and used the leftover tube to repair the review mirror when it fell off.

I had tried 2 part epoxy but when summer came and it got hot, failure.
fred l kennedy
Reply

EricEaves Offline
Junior Member
#7
I'm not looking for the adhesive, I'm looking for the clips outright. The current ones are broken. I think I managed to find aluminum replacements. Anyone seen or used these?


Attached Files Image(s)
   
"Failure is simply the opportunity to begin again, this time more intelligently" -Henry Ford
Reply

BJL Offline
Moderator
#8
i havent installed them. but these are the ones i have, referred by others in the Group.

https://www.ebay.com/itm/Equalizer-MD128...1880968181
Brian Larkin
88TC 330,000 miles
Slightly Modified
Reply

EricEaves Offline
Junior Member
#9
Awesome, that's the info I needed. Thanks!
"Failure is simply the opportunity to begin again, this time more intelligently" -Henry Ford
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB