| #1 |
I am going with a #" exhaust, but I'm trying to cut a little cost, so I decided on one muffler. I found an ultra flow that is 3" in and has two 2 1/2" out pipes. Could I run one pipe to the muffler in the stock location, then run two tailpipes from the two outlets? I would have the shop custom bend the pipes. I want 2 1/2" tailpipes. I just want to know if there's room for this, or if I need to run two mufflers. I would run a single exhaust, but my ground effects has two cutouts in the back.
1987 Turbocoupe
Painted sonic blue pearl
Ground effects w/S351 wing
17x9 Chrome Cobra Rs
255/45/ZR17 Kumho 712s
KYB suspension
MOMO shift knob and boot
K&N cone air filter, Gillis boost valve, T-3 turbo, ported intake and E6, A237 roller cam, MSD coil, Kirban FPR
Full 3" exhuast w/Ultra Flo muffler
Brute force clutch
White faced indiglo gauges
2 12" Rockford Fosgate subs and amp
Painted sonic blue pearl
Ground effects w/S351 wing
17x9 Chrome Cobra Rs
255/45/ZR17 Kumho 712s
KYB suspension
MOMO shift knob and boot
K&N cone air filter, Gillis boost valve, T-3 turbo, ported intake and E6, A237 roller cam, MSD coil, Kirban FPR
Full 3" exhuast w/Ultra Flo muffler
Brute force clutch
White faced indiglo gauges
2 12" Rockford Fosgate subs and amp