methos
Joined:
May 2001
Cynthiana, KY
|
|
you guys aren't going to believe this shiznigity, but my turbo STILL spools(just a little)!!! here's the bizaar thing, there's no oil in it, there's a screw driver in the compressor, the nut on the compressor is gone, the BCS is disconnected, AND the bleeder valve is twisted wide open!! and I still here it try and I can watch the boost guage hit +1 PSI!! I think that I am never going to get rid of this turbo because it is the posessed turbo from hell! Even broke, I'll still have it. Just to make sure that I am the only one that has the "Christine Turbo". Just thought that I would keet you guys updated on this...
------------------
88TC - 5speed, all options but leather and sunroof
Mods:
Esslinger Prepped head, AiResearch T-3, 3.73 gears, Schneider custom grind cam, chromed rims, dynomax on the duals, and last but not least... new interior
Jason Schaffer
88TC - 5speed, all options but leather and sunroof
Mods: 3.73 Gears
Finally getting it back together.
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
Sounds like the perfect turbo for my engine from Hell. [Image: frown.gif]
------------------
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges. New engine shortly, ported head and
manifolds, polished and cc'd chambers, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, Walbro 190 pump and T-3 for starters. KB subs
and jack rails.
Pete Dunham
|
Turbocruiser88
Joined:
Apr 2001
Lorain, OH USA
|
|
I still think the Duct tape would fix all your problems [Image: smile.gif]
Les T.
88 TC - Light Sandalwood/Black 5sp. *RIP* Precision SC-50, A237, Stage 3 clutch, Ported E6/Intakes, 54k motor
94 BMW 540i
92 Saab 900s Vert
82 Stang GT - T-Top, Soon to be 2.3T - that engine shown above!
80 MB 300SD - Turbo Diesel
96 Explorer - 5.0 GT40 AWD, Soon to be turbo'd
|
tylerport
Joined:
Apr 2001
Freedom IN
|
|
That just goes to show how inaccurate the stock boost gauge is. What your reading as 1 psi of boost is actually 0 or just a little vacumn.
Jim Portteus
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
Hey, when my IHI took a dump, it began leaking oil, and woulld only boost to 6 psi. When I took it apart, the shaft had ONE HALF INCH of play along the axial direction, the compressor blades were all chewed up from contacting the housing! But it srill boosted! Didnt even make too many strange noises!
------------------
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
|