North American Turbocoupe Organization



which volvo intercooler works??
ianbfromct Offline
Senior Member
#1
Ive seen on stingers website that he sells piping kits for NPR and Volvo intercoolers. My question is which volvo should be getting the IC from???
88 5 speed TC
-3" DP,lowered, 255 Walbro, Gillis valve, Cobra R's, bondo/rust, Stinger's PIMP Ecu
Reply

86XR7auto Offline
Moderator
#2
Not sure which one....Volvo IC's are really old school.

What other mods you got on that 88TC?

Travis
86XR7 in pieces...old time [email protected] http://www.youtube.com/watch?v=kGsz7PdEqTI 88TC stock Red RHSC [email protected], 01 Z71=Nice winter ride, 01 CVLX w/HPP wifes ride!
Reply

ianbfromct Offline
Senior Member
#3
Boost controller and after this weekend 3" down pipe and ultraflo mufflers. Just thinking ahead and the Volvo intercoolers seem to be pretty cheap. And if I buy one of stingers piping kits I'd be good to go. Problem is he doesn't specify on which Volvo ic we need ??
88 5 speed TC
-3" DP,lowered, 255 Walbro, Gillis valve, Cobra R's, bondo/rust, Stinger's PIMP Ecu
Reply

86XR7auto Offline
Moderator
#4
I would just email him...he is super helpful....

Travis
86XR7 in pieces...old time [email protected] http://www.youtube.com/watch?v=kGsz7PdEqTI 88TC stock Red RHSC [email protected], 01 Z71=Nice winter ride, 01 CVLX w/HPP wifes ride!
Reply

TurboBoost88 Offline
Member
#5
I think it's the volvo 740 .
88 TurboCoupe,Midnight Metallic Blue on Blue cloth, 140 m.p.h. speedo, 96,000 miles, 5spd. Gills valve, many new parts waiting to be installed..88 TC, Silver, 5spd, My first car, wish I still had that one! Built for customers: 67 Ford Fairlane,69 Mach I,70 Mach I Clone,95 Ranger 2.3/5.0 EFI Conversion,99 Cobra Procharger SC-1 Install/Tune,Factory Five Racing Mark III Cobra #4114,1955 Black on Black Thunderbird for local Ford Dealer owner's wife.
Reply

OU812MACH1 Offline
Senior Member
#6
That would be good info to have. I too would like to get rid of the OE intercooler. But can't afford 500.00 now , I'm saving for Boport stuff and a engine rebuild.
o4 mach-1,white,4at 1 of 169 ,MAC air filter and x-pipe, SCT tune / o9 BMW 328 M-SPORT, white, 6at/ 87 Turbocoupe ,white,4at,KIRBAN afr,GILLIS boost valve,Garrett/SVO T3,cold air,3" STINGER down pipe and tail pipe, DYNOMAX ultra flow stainless muffler, Walbro 255L fuel pump,cleaned and flowed injectors,STINGER BOV, built A4LD trans w/all
4x4 Explorer guts, K245/F57FA torque converter.
Reply

ianbfromct Offline
Senior Member
#7
OU812MACH1 Wrote:That would be good info to have. I too would like to get rid of the OE intercooler. But can't afford 500.00 now , I'm saving for Boport stuff and a engine rebuild.


I hear you on that I'm right there with you on being on a budget. I actually was able to find a Volvo intercooler at the Carlisle Swapmeet for 30 bucks I believe it's off at 7:40. I can post pictures later if you want. I'm gonna be most likely using eBay intercooler piping kit and kind of make it work on my car. They say you need a Ranger radiator but I have a buddy who's a pretty good fabricator I want to have him look at it first and see if there's any possible way to make the 740 intercooler work with the stock radiator and condenser.
88 5 speed TC
-3" DP,lowered, 255 Walbro, Gillis valve, Cobra R's, bondo/rust, Stinger's PIMP Ecu
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB