captnsvo23t
Joined:
Jul 2002
Johnstown CO , USA
|
|
I'm gethering info on porting my head. I have a good spare head that I'd like to port from an 87/88 tc. I just need to know what head I'm dealing with, it's in storage right now and I can't get to it to look was hoping some one here would be kind enough to help. Thanks a ton Big Mo.
86 SVO. 87 Silver TC 5 spd With a K&N in the fender T4E/III .50/.48P gutted upper and lightly ported lower. Home made MBC/15LBS
|
Dan E
Joined:
Apr 2001
Greensboro, NC
|
|
If I understand your question correctly ???
The 87-88 TC had the 2.3 Turbo Head with the D-Shaped intake ports (not oval).
What exactly is your question ???
------------------
Dan Eaves
88TC 5spd, Crower 5.5" Sportsman Rods, Short Wiseco Pistons bored .030" Over, Ported Head with Polished Combustion Chambers, Gutted & Polished Upper, Ported & Polished Lower, Polished T/B, Ported E6, SVO T3 .63AR Turbo, Bosch Bypass Valve, 3" DP w/No Cat, 2 1/2" DynoMax single cat back w/DynoMax Super Turbo Muffler, RR Cam, K&N in Fenderwell, Gillis Boost Valve, Centerforce I Clutch, Removed A/C, Polished Wheels, Polished Valve Cover, Polished Crank and W/P Pulleys, Walbro 255LPH HP Pump, Kirban Adj FPR, and the DAMN Heater Core is new too !
NATO MEMBER (Vice Chairman...if it's a vice...I deal with it)
Dan Eaves
88TC 5spd Vermillion Red, Polished...everything...
|
captnsvo23t
Joined:
Jul 2002
Johnstown CO , USA
|
|
So is this not a desirable head? I've had ity checked for cracks and it's clean just needs some porting and a vale job etc. also any pics or info on how where to port for the vest results would b e appreciated.
86 SVO. 87 Silver TC 5 spd With a K&N in the fender T4E/III .50/.48P gutted upper and lightly ported lower. Home made MBC/15LBS
|
natmac3
Joined:
Mar 2002
Aberdeen, MD
|
|
Awhile back on TF (ubb.turboford.org) there was a thread dedicated to head porting that had lots of good pix, you might try checking there...
1987tc
|
captnsvo23t
Joined:
Jul 2002
Johnstown CO , USA
|
|
Quote:Originally posted by natmac3:
Awhile back on TF (ubb.turboford.org) there was a thread dedicated to head porting that had lots of good pix, you might try checking there...
I found the thread in the arachives but n pics or atleast can't get them to come up. I Pm'ed ya on the TF board as well. [Image: smile.gif]
86 SVO. 87 Silver TC 5 spd With a K&N in the fender T4E/III .50/.48P gutted upper and lightly ported lower. Home made MBC/15LBS
|