|
Where should I tap into for the illumination on my vac/boost gauge? I checked the tech board and it said at the fuse panel but I plan on mounting it in the center console above the radio....is there anything close to there? Thanks
1988 Turbo Coupe.....Rolling stock with a boost valve and VAC/Boost gauge.
|
Joe F
Joined:
Jul 2002
Hawkins, Texas - USA
|
|
Tap into the illumination wire for the radio. I forget what color but it's mentioned in several past posts; don't have my EVTM so I can't look it up. The search feature is your friend, good luck.
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
Blue with red stripe.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
|
Nice...thanks.
1988 Turbo Coupe.....Rolling stock with a boost valve and VAC/Boost gauge.
|
AerobirdMotorsports
Joined:
Dec 2004
Kelso, WA USA
|
|
I was just getting ready to search for that...
Thanks!
|
|
I actualy decided to put it where the clock is. I got out the 'ol DMM....Brown wire if anyone is interested. Now I have to just ask the father in law to make up a plate.
1988 Turbo Coupe.....Rolling stock with a boost valve and VAC/Boost gauge.
|
MeAndMyT
Joined:
Sep 2006
Dearborn, Michigan
|
|
i hooked mine up to the back of hte headlight switch
88 TC 5 spd 22x,xxx miles Ran 15.3 in 1/4.. K&N Cone. Gillis boost controller @ 15. Faze Boost Gauge. A/C belt off. 2 1/2 inch exhaust dumped at axles.
|