North American Turbocoupe Organization



Where shoud hook up electrical for guage?
JDN2424 Offline
Junior Member
#1
Where should I tap into for the illumination on my vac/boost gauge? I checked the tech board and it said at the fuse panel but I plan on mounting it in the center console above the radio....is there anything close to there? Thanks
1988 Turbo Coupe.....Rolling stock with a boost valve and VAC/Boost gauge.
Reply

Joe F Offline
Posting Freak
#2
Tap into the illumination wire for the radio. I forget what color but it's mentioned in several past posts; don't have my EVTM so I can't look it up. The search feature is your friend, good luck.
JR's Place - My '87 Turbocoupe
Reply

Jeff K Offline
Administrator
#3
Blue with red stripe.
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
05 Taurus SEL Duratec daily driver
04 Taurus Duratec (wifes car)
02 Pontiac Grand Prix GT
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

JDN2424 Offline
Junior Member
#4
Nice...thanks.
1988 Turbo Coupe.....Rolling stock with a boost valve and VAC/Boost gauge.
Reply

AerobirdMotorsports Offline
Banned
#5
I was just getting ready to search for that...

Thanks!
Reply

JDN2424 Offline
Junior Member
#6
I actualy decided to put it where the clock is. I got out the 'ol DMM....Brown wire if anyone is interested. Now I have to just ask the father in law to make up a plate. Smile
1988 Turbo Coupe.....Rolling stock with a boost valve and VAC/Boost gauge.
Reply

MeAndMyT Offline
Senior Member
#7
i hooked mine up to the back of hte headlight switch
88 TC 5 spd 22x,xxx miles Ran 15.3 in 1/4.. K&N Cone. Gillis boost controller @ 15. Faze Boost Gauge. A/C belt off. 2 1/2 inch exhaust dumped at axles.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB