North American Turbocoupe Organization

what do i need for my nose
1badstang Offline
Junior Member
ok, so i have the bumper cover. im getting headlights. what else do i need. im getting the header panel also. its for a n 87 tc. theres holes in the bumper for something to attach to it but i dont know. any pics would be great. thanks
1988 trik edition turbocoupe
mods:cone filter
sluggish auto tranny.
5 speed swap soon.

MODS: cone filter, boost conrtoller, no cat, flowmaster muffler, 4:10s, ranger cam.

Kev Offline
Posting Freak
The holes low in the front bumper are where the fog lights peek out. It's not clear what you are talking about here.

If you are putting together a complete front, then you'll also need the inner and outer lamps (the lenses on either side of the headlights). The inners are specific to the turbo model as they are a slightly different size, but the outers are compatible for all tbird models in 87 and 88.
1988 TC 5spd

MeAndMyT Offline
Senior Member

Umm heres a picture of my car's front end. I'm not sure what your really asking though. If you go on the main website there's alot of pictures of our cars.
88 TC 5 spd 22x,xxx miles Ran 15.3 in 1/4.. K&N Cone. Gillis boost controller @ 15. Faze Boost Gauge. A/C belt off. 2 1/2 inch exhaust dumped at axles.

xcrunnerbd Offline
Posting Freak
There are some small holes in the very front of the bumper cover. These are for a front license plate.
Project 13 sec. / 30mpg in '88 TC 5Speed : [email protected] / 32+ mpg

On The Car: KN cone, 2-stage [email protected] 15psi wired to fuel switch, Kirban AFPR @ 39psi, Walbro 255 HP FP, 130A 3G Alt., Full 3" Stinger Exhaust incl. cat. no muffler,

Shelf: .48 T3, ported E6, BPV

an88turbopooper Offline
Junior Member
i just took mine off of my car looks way better but i still have it laying around
88 tc
Msd soft touch
Msd 2step
3g alt
Autometer gauges
K&n filter
Turbo xs rfl blow off
Turbonetics boost controller
turbopooper power!!!

Users browsing this thread:
1 Guest(s)

Theme © iAndrew 2018 - Software MyBB