North American Turbocoupe Organization



what do i do?
ericg88tc Offline
Junior Member
#1
ok i have a 88tc i am redoing the car is coming along just slow i am looking for exhaust atr dual but they dont make it any more so i checked with shops to custom bend me a system and everyone can not bend a mandrel bend so i like the looks of the duals does anyone have any suggestions also what are you guys doing about the fogged headlights
Reply

grey88smokin Offline
Posting Freak
#2
Aerobird has the original Hella foglights. Be patient and it will all be worth it.

------------------
My TC
84 SVO 1C
08 MKZ
Reply

ericg88tc Offline
Junior Member
#3
i need headlights also and i hope you are right about being worth it cause i have alot of time invested in it
Reply

Joe F Offline
Posting Freak
#4
Keep looking around, eventually you'll find someone who can do the mandrel bends. You might also keep a lookout on eBay, used ATR systems come up for sale now and again.

Just a suggestion, your posts will be a lot easier to read if you capitalize and use some puntuation.

HTH.

------------------
Joe F.
JR's Aerie - Our 3 TC's

[This message has been edited by JoeCool (edited 10-16-2005).]
JR's Place - My '87 Turbocoupe
Reply

Pete D Offline
Administrator
#5
Exhaust: here is an alternative:
"I used a 2.5" Dynamax dual system for Mustangs (GT), '93 and earlier ($299), available from Summit Racing and others. I also used the long (86 SVO) down pipe from Sacremento-Mustang ($139 + shipping). A
3" hi flow cat converter (Catco from Summit - about $60). I had an shop install it for me. They made up a 3" to Dual 2.5" Y pipe for
it. Since the TC's are longer than the Mustangs the Dynamax system come up short behind the rear axles. This is easily remedied with some 2.5" diameter pipe. I used stainless steel which I polished myself. Looks great.

Headlights lenses. There are lots of posts on various ways to polish up fogged lenses. Try the search feature. http://natomessageboard.com/cgi-bin/sear...&default=1
You can still get new lenses through Ford, I'll be picking up some I ordered on Monday. http://natomessageboard.com/Forum12/HTML/000027.html
Around $60 each for new, much less to redo your current ones.

A little punctuation - priceless
Pete Dunham


Reply

thecrusher315 Offline
Senior Member
#6
Check with Stinger Performance in the vendors section. He might have what your looking for on the exhaust....Tommy

------------------
Tommy Moore,
Paying NATO Member and proud of it!!!

Code 33 Silver Blue Clearcoat Metallic 1987 Turbo Coupe, Shadow Blue interior, 5 Speed with Spec stage 2/3 clutch/pressure plate, Hurst shifter, Gillis valve, 140 mph speedo, Auburn Posi unit with 3.73 gears,Flowmasters, KYB struts, shocks , and quads, 2nd and 5th owner of the car. I just had to buy it back.
.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB