North American Turbocoupe Organization



water injection
nirvana Offline
Junior Member
#1
Anybody out there built a water injection system ? I need to know what parts you used and from what.I can't afford 500.00 for a Spearco or Aquamist
Reply

Jeff K Offline
Administrator
#2
Are you a NATO member? The next NATO Newsletter (available to members only),which is due out shortly, will have a complete write up, including pics, of my home made water injection system made using JY parts and parts that can be had new for just a few $$. My total cost to build was about $30. Total time I spent developing and testing was probably over 100 hours.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
05 Taurus SEL Duratec daily driver
04 Taurus Duratec (wifes car)
02 Pontiac Grand Prix GT
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB