North American Turbocoupe Organization



Vavle cover gasket wont allign
k98311 Offline
Member
#1
So ive been through 3 gaskets trying to get the gasket replaced. i lay the gasket on the engine first and the put the valve cover on and it ALWAYS seems to move. does anyone know an easier way to put it on or a way to make it stay? im getting real tired of working on this car to be honest which hurts me because i love this little TC haha
1986 gold TC 5 speed 100000 miles turbo muffler cat delete
Sounds like a turbo diesel people say
Reply

Not B Anymore Offline
Administrator
#2
What gasket are you using? I'm guessing it's not the rigid ranger gasket? You can go out and get yourself a few bolts of the correct size from the hardware store, cut the heads off, and use them as locating dowels to get the VC on.
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
Reply

k98311 Offline
Member
#3
im using a rubber one from oriellys. ill try the dowel trick.
B thats a beautiful car you got there
1986 gold TC 5 speed 100000 miles turbo muffler cat delete
Sounds like a turbo diesel people say
Reply

Not B Anymore Offline
Administrator
#4
Thanks, man! It needs body work and paint, but I can usually make it look pretty good in pictures!

I forgot to mention - make sure the gasket, head surface, and valve cover surface are all completely dry when assembling. Any oil on there will make it shift all over the place. If you take the VC off again in the future, consider getting the Ranger VC gasket. Way easier to use and probably the most durable gasket out there.
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
Reply

boosted chicken Offline
Senior Member
#5
Blue parts store VC gasket = Angry
Ford rigid metal reinforced VC gasket = :rockin:
88 TC#1 2.9L tall deck. Essy SVO head, Boport header, BW SX369 turbo, C4 trans, MS2xtra
88 TC#2 drag car project(someday)
88 TC#3 parts car (just needed the header panel...bought the whole car, lol)
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB