North American Turbocoupe Organization



vac hose location
louboy Offline
Member
#1
I have an '85 t/c and would like to know where the hose from the egr terminal,on the passenger side top corner runs to.the terminal that i'm talking about is black with two other hard plastic hoses going to it.one goes to the egr itselfand the other goes into the firewall.there is another hose connection left and the book shows a vacuum line running along the strut tower but doesn't show whree it connects to.i don't see it on my 87 or 88,just the 85.Thanks Lou
lou gasson
Reply

Pete D Offline
Administrator
#2
Lou, I just posted a picture here: http://natomessageboard.com/ultimatebb.p...1;t=016694

If understand what you are asking, one of the vacuum hoses goes to the EGR valve diaphram. The other should go to the vacuum tree on the firewall, where most of the other vacuum hoses go. Is that what you are asking??
Pete Dunham


Reply

louboy Offline
Member
#3
hey pete; sorry about the poor description.i looked some more and it is a check valve.one side goes to the vacuum tank,under the right fender and it looks like the vacuum port,which is on the saucer shaped section of the valve goes to the dist. block.is this a little clearer?.the second hard plastic line still seems to hook up to the vacuum port of the egr valve itself.hope this makes it clearer.am i right with this configuration?,thanks again for the help pete. LOU
lou gasson
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB