George
Joined:
Apr 2012
Flora, IL
|
|
So in a rush before work i bought a Dynamax muffler off ebay. Well I ended up getting center in/out by accident and I have an appt next week at an exhaust shop to get a 3" single turbo back installed. Will the exhaust guy have a hard time installing it or will a have to get an offset muffler? He does really good work and he's pretty affordable. I just don't want to give him alot of extra work. So, easy install or no? Thanks
88 TC with reman Airesearch T3 .58ar, Walbro 255, cone filter, Gillis mbc set @ 17psi, Mustang A-pillar pod with vac/boost and a/f, full 3" single exhaust w/ Dynomax ultraflow muffler and header, recirculating BOV custom tapped to factory intercooler
|
5.0TurboCoupe1988
Joined:
Apr 2008
Broken Arrow, OK
|
|
that's going to put it right against the drive shaft. he might be able to rotate it to clear but it's going to be close and it's not going to be pretty.
1988 TC 2.3/5-Speed, 148K
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
^^^^ +1
Sell what you got and get an offset muffler.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
George
Joined:
Apr 2012
Flora, IL
|
|
Will a offset in center out fit with no problems? Cant seem to find offset in/out ultraflows. Thanks
88 TC with reman Airesearch T3 .58ar, Walbro 255, cone filter, Gillis mbc set @ 17psi, Mustang A-pillar pod with vac/boost and a/f, full 3" single exhaust w/ Dynomax ultraflow muffler and header, recirculating BOV custom tapped to factory intercooler
|
George
Joined:
Apr 2012
Flora, IL
|
|
Found one from summit. One other question. Will a 3" downpipe pretty much be a straight forword bolt-on to the turbo elbow? Thanks
88 TC with reman Airesearch T3 .58ar, Walbro 255, cone filter, Gillis mbc set @ 17psi, Mustang A-pillar pod with vac/boost and a/f, full 3" single exhaust w/ Dynomax ultraflow muffler and header, recirculating BOV custom tapped to factory intercooler
|
Stinger
Joined:
Oct 2005
Shawnee (Kansas City), KS, USA
|
|
A 3" downpipe should bolt right on (assuming you got one with a stock style 2 bolt ball/socket flange).
|