North American Turbocoupe Organization



turbo water hoses
Ricky03 Offline
Senior Member
#1
Where can I get the red waterline hoses that connect the turbo waterlines on a 88 TC ? The two that are about 1/4" and 4" long. Can't seam to find any around here.
88TC :5 speed swap,255 walbo fuel pump, 3" down pipe with 2 1/2"duals, Ported upper and lower intake, ported E-6, Kiben adjustable fuel pressure regulator,T-3 turbo,Forge BPV,Steeda Tri-x shifter,Autometer gauges,Racer Walsh stage #2 cam, Spec stage 3 clutch,Stinger FMIC
Reply

turbotbirdguy79 Offline
Senior Member
#2
I think I found my hose by searching on here.
1988 Tc,SC50(.63),Bosch BPV,Coolingmist methanol injection activated at 10 psi,FMS big valve 1.89/1.59 head,a234,ported E6,ported lower and upper intake,Gillis,3"downpipe,3"exaust,Kirbin AFPR,255 HP LPH pump,Racer Walsh adj cam pully 2* advanced*,K&N cone,MSD Blaster,autolite 103 plugs,T5 swap,3.73s,shifter,Centerforce stage 2 clutch,motorcraft tuneup.
Reply

tps87turbo Offline
Posting Freak
#3
They are discontinues from Ford. You can try Napa to see if they have any Hi-Temp water hoses.
Tony Sceia -

HIS Red 88 TC
http://turbotbird.com/showroom/data_r-z/...a_88tc.php
HERS - Blue 87 TC, fully loaded with every option, Work in Progress
87 Gray TC Parts Car - Gave to BJL and is now his daily driver
Reply

Pete D Offline
Administrator
#4
NAPA carries some hi temp hose. But I don't know if they carry it in that small a diameter for the supply side on an IHI
Pete Dunham


Reply

ERIC J snowbird Offline
Posting Freak
#5
Mike has them.
http://natomessageboard.com/cgi-bin/ulti...2;t=000022
- ERIC J
87 Black 5speed, 88 Black 5speed.
Reply

glenn-tc88 Offline
Member
#6
my measurement is 5/16? nobody listed what size they used?
Glenn Dembowski
2003 Mercury Marauder Black
1988 Thunderbird TC Sandalwood 5sp
1974 Harley Davidson FLH
1998 Chevrolet K1500
Reply

Jeff K Offline
Administrator
#7
5/16" sounds about right. I bought a few feet of high temp Silicone hose from Ebay almost 20 years / 100+K miles ago. Been working fine ever since.
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

glenn-tc88 Offline
Member
#8
Jeff K Wrote:5/16" sounds about right. I bought a few feet of high temp Silicone hose from Ebay almost 20 years / 100+K miles ago. Been working fine ever since.
thank you jeff
Glenn Dembowski
2003 Mercury Marauder Black
1988 Thunderbird TC Sandalwood 5sp
1974 Harley Davidson FLH
1998 Chevrolet K1500
Reply

fred k Offline
Senior Member
#9
(01-30-2006, 10:53 PM)Ricky03 Wrote: Where can I get the red waterline hosesĀ  that connect the turbo waterlines on a 88 TC ? The two that are about 1/4" and 4" long. Can't seam to find any around here.
hps-siliconehoses except these are either black or blue

http://www.hps-siliconehoses.com/hps-8mm-silicone-tube-tubing-coupler-3-feet-coolant-tube-hose-4-ply-blue.html
fred l kennedy
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB