North American Turbocoupe Organization



Thunderbird Pics
Noname
Unregistered
#1
Thought I would let you guys see my bird...
Reply

wwwtbirdforumcom Offline
Senior Member
#2
sweet ride - good luck``

------------------
Here is my 1988 TC, Clean look - Glad to be here...
[email protected]
Here is a pic of my baby
NATO Member
Here is my 1987 TC, Mean look - Glad to be here...
[email protected]
[Image: Cumberland.gif]
Reply

Jeff K Offline
Administrator
#3
Sharp car! Those wheels look just like the wheels I have on my 86 Tbird 5.0. Are they American Racing 2 piece?

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

tylerport Offline
Senior Member
#4
very sharp!

------------------
Jim Portteus
86 Turbo Coupe, 131K Miles, 140MPH Speedo, Gillis Valve, 2 1/2" Downpipe to 2" Duals w/ 18" Glasspacks, 245/50R16's and new paint.
Jim Portteus
Reply

Pete D Offline
Administrator
#5
Nice looking car Delos. Why not send us the info form and put it in the showroom?

------------------
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham


Reply

Noname
Unregistered
#6
Pete D. I'll get that info filled out and put it in the show room. Hopefully before too long I can get involved as a member also. Cash has been a little short here lately!
Jeff, those are one piece wheels. Got'em in a swap. Wish they had a little more offset.

------------------
1986 Turbo Coupe, basically stock at this time/ 1988 Cougar LX 5.0 (soon to be gone)/ 1990 Bronco II / 1991 F150 ex cab 4X4
Reply

B D Offline
Member
#7
Nice! I like the wheels and tires.
B D

------------------
87 TC 5-Speed
88 Thunderbird Sport 5.0
91 Ranger
87 Turbocoupe 5-Speed, Remote mount K&N filter system,Steeda Shifter,New Heater Core,new clutch.
88 Turbocoupe "Mach 1 SE "
88 Thunderbird Sport 5.0 (Retired)
91 Ranger
NATO Member
Reply

Turbofan Offline
Member
#8
Nice picture. What color is that? It is hard to tell from the picture if it is black or dark cherry. I am going to repaint next spring and am looking! Anyone have a good site to look for color? I don't want basic.... am thinking really really dark metallic cherry, so dark that it is almost black... ideas?
I just want my Bird back!
Reply

Noname
Unregistered
#9
Actually that is charcoal. The original pictures do not look that dark. Sort of wish it was that dark. That dark cherry metallic sound like a good looking color.

------------------
1986 Turbo Coupe, basically stock at this time/ 1988 Cougar LX 5.0 (soon to be gone)BLOWED THE CAT UP YESTERDAY Now if got to rebuild it before I can sell it. Bad part is I thought I had buyer for it! OH WELL/ 1990 Bronco II / 1991 F150 ex cab 4X4
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB