North American Turbocoupe Organization



Teves Mark II Remanufacturing Services
88chickentc Offline
Junior Member
#1
Folks, I found this link on the TBird Supercoupe Club site. http://www.sccoia.org/articles/anti-lock...ng-system/

It has good tech info, but provides information on three rebuilders for our Teves II system: SIA Electronics, Prior Automotive, and Cardone. Unfortunately, their page did not have a date on it, and I have not independently verified they still support Teves. Thought I'd share though. Maybe this info was on the forum already, but it didn't come up readily in searches I ran.
1931 Deluxe Coupe
1949 Club Coupe
1952 F-1
1971 Torino GT Convertible
1988 Thunderbird Turbocoupe
Reply

yayo_ayala Offline
Junior Member
#2
Hi, Do you have the name of the places?
Reply

anasazi4st Offline
Senior Member
#3
(08-27-2020, 09:50 PM)yayo_ayala Wrote: Hi, Do you have the name of the places?

After reading this first post months ago I did a search. There is a place called Module Master in Ohio that some have suggested, here and other sites. Turns out, they don’t offer ABS services any more.

The other is located here in the Phoenix suburb of Mesa, AZ, called ASAP Speedo. I talked to a phone operator there who appeared knowledgeable on the subject—he put me on hold several times to verify the facts. The phone number is 480 464-2727, ask for Ray or Brad. I was quoted a starting price of $250 to rebuild an existing assembly, using new parts where needed—IF they are still available. I was told it could be more or less, depending on the parts and work required. I ended up doing the PinPoint Tests in the manual for mine, and replacing those parts found to be faulty from another ABS unit that had other difficulties, so I have had no interaction with them other than that phone call.

Please post and let us know what you learn.
Another proud dues-paying member.

1987 Turbo Coupe w/T5OD, 8.8 axle, grey smoke; most options. Got it in 1991 with 41K miles: 3 turbos, 2 heater cores, 1 T5OD full rebuild, 5 clutches, 1 head gasket, 2 Teves II ABS units, etc. later....
Mikey97D likes this post
Reply

88chickentc Offline
Junior Member
#4
(08-29-2020, 08:35 PM)anasazi4st Wrote:
(08-27-2020, 09:50 PM)yayo_ayala Wrote: Hi, Do you have the name of the places?

After reading this first post months ago I did a search. There is a place called Module Master in Ohio that some have suggested, here and other sites. Turns out, they don’t offer ABS services any more.

The other is located here in the Phoenix suburb of Mesa, AZ, called ASAP Speedo. I talked to a phone operator there who appeared knowledgeable on the subject—he put me on hold several times to verify the facts. The phone number is 480 464-2727, ask for Ray or Brad. I was quoted a starting price of $250 to rebuild an existing assembly, using new parts where needed—IF they are still available. I was told it could be more or less, depending on the parts and work required. I ended up doing the PinPoint Tests in the manual for mine, and replacing those parts found to be faulty from another ABS unit that had other difficulties, so I have had no interaction with them other than that phone call.

Please post and let us know what you learn.

Sorry.  I obviously did not track the thread.  https://www.priorautomotive.com/ was the most promising one.  I haven't called them though.
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB