North American Turbocoupe Organization



t-3 conversion question.....please look.
Thndrchckn420 Offline
Senior Member
#1
Does anyone have some close-up pics of a t-3 compressor housing that has been ground to fit the 87-88 IC? Do you open up the outlet at all? The IHI seems to have a much larger outlet hole. You can email them to me at [email protected] or post them here. Thanks for any help you can offer.

------------------
88 5-spd. bypassed BCS, cleared cat, Gillis valve,ranger roller, Walbro 255lph fuel pump, Kirban AFPR, hopefully new T-3 not too far in the future.
88 5-spd. Precision SC-50 ball bearing turbo, gillis, full 3" exhaust w/ 3- 1/2 crome tip, ported E-6, ported big exhaust valve head, ranger roller cam, Essy cam gear, K&N cone in front of the radiator, gutted upper, knife edged lower, Walbro 255HP pump, Kirban AFPR, Forge BPV, PA Performance 130 AMP Alt...
Reply

t-bird88 Offline
Senior Member
#2
Just make it look like the IHI one, that is all that I did. You can use a sander and just sand that dude round.

You will also have to make some sort of adapter plate to clock the snout that bolts to the front of the compressor housing. This needs to be done so that the VAM hose can still be inline with the intake for the compressor and the VAM itself. That hose cannot make a sharp bend.

Jim B [Image: biggrin.gif] .

------------------
Gunmetal Grey 88 TC, 85 & 88 TC parts cars.

I am now working on my sanity before mental illness sets in.
Gunmetal Grey 88 TC!!!!
Reply

Thndrchckn420 Offline
Senior Member
#3
Quote:Originally posted by Thndrchckn420:
Does anyone have some close-up pics of a t-3 compressor housing that has been ground to fit the 87-88 IC?


Thanks, but not quite what Im looking for. Do you have any pics? Dont mean to be rude, just need to visualize. (left handed)


------------------
88 5-spd. bypassed BCS, cleared cat, Gillis valve,ranger roller, Walbro 255lph fuel pump, Kirban AFPR, hopefully new T-3 not too far in the future.

[This message has been edited by Thndrchckn420 (edited 02-05-2005).]

[This message has been edited by Thndrchckn420 (edited 02-05-2005).]
88 5-spd. Precision SC-50 ball bearing turbo, gillis, full 3" exhaust w/ 3- 1/2 crome tip, ported E-6, ported big exhaust valve head, ranger roller cam, Essy cam gear, K&N cone in front of the radiator, gutted upper, knife edged lower, Walbro 255HP pump, Kirban AFPR, Forge BPV, PA Performance 130 AMP Alt...
Reply

t-bird88 Offline
Senior Member
#4
Get ahold of tlswart. My car and all of my parts are at his house. See if you can get him to take a pic of it and post it here. I don't have any way of posting pics, hell for that matter I can't even take them [Image: mad.gif] .

Jim B [Image: biggrin.gif] .

------------------
Gunmetal Grey 88 TC, 85 & 88 TC parts cars.

I am now working on my sanity before mental illness sets in.
Gunmetal Grey 88 TC!!!!
Reply

Thndrchckn420 Offline
Senior Member
#5
Cool, thanks.

------------------
88 5-spd. bypassed BCS, cleared cat, Gillis valve,ranger roller, Walbro 255lph fuel pump, Kirban AFPR, freshly rebuilt .60/.63 T-3, ported intakes, exhaust, and head soon.
88 5-spd. Precision SC-50 ball bearing turbo, gillis, full 3" exhaust w/ 3- 1/2 crome tip, ported E-6, ported big exhaust valve head, ranger roller cam, Essy cam gear, K&N cone in front of the radiator, gutted upper, knife edged lower, Walbro 255HP pump, Kirban AFPR, Forge BPV, PA Performance 130 AMP Alt...
Reply

Pete D Offline
Administrator
#6
Quote:My car and all of my parts are at his house

That was your first mistake [Image: biggrin.gif]
Pete Dunham


Reply

t-bird88 Offline
Senior Member
#7
I know, he keeps telling me "what car???" I shoulg get it back up and on the road in a week and a half or so...hopefully.

Although he does have to keep the beef jerky comming [Image: wink.gif] .

Jim B [Image: biggrin.gif] .

------------------
Gunmetal Grey 88 TC, 85 & 88 TC parts cars.

I am now working on my sanity before mental illness sets in.
Gunmetal Grey 88 TC!!!!
Reply

Thndrchckn420 Offline
Senior Member
#8
Hey Pete, whats your turn-around time on porting intakes/exhaust? I might be doing them a piece at a time to ease the pain on my wallet, but with my new turbo, it will have to be done.

------------------
88 5-spd. bypassed BCS, cleared cat, Gillis valve,ranger roller, Walbro 255lph fuel pump, Kirban AFPR, freshly rebuilt .60/.63 T-3, ported intakes, exhaust, and head soon.
88 5-spd. Precision SC-50 ball bearing turbo, gillis, full 3" exhaust w/ 3- 1/2 crome tip, ported E-6, ported big exhaust valve head, ranger roller cam, Essy cam gear, K&N cone in front of the radiator, gutted upper, knife edged lower, Walbro 255HP pump, Kirban AFPR, Forge BPV, PA Performance 130 AMP Alt...
Reply

tlswart Offline
Senior Member
#9
420,
I loaned out my digital camera. My son had to use it for the next month. I will see if I can borrow one and get you some pictures. I just went out and looked at it but I am unsure what it is that you would like. The adapter plate and the high pressure side of the compressed intake air?

Please understand that the TC in MY garage is MY TC. [Image: tongue.gif]

If any one can get pictures sooner (I hate that word) please jump in.

------------------
Terry: 88TC, 5spd, Gillis valve. NATO Member

[This message has been edited by tlswart (edited 02-05-2005).]
Terry: 88TC, 5spd, Gillis valve.
Reply

Thndrchckn420 Offline
Senior Member
#10
Quote:Originally posted by tlswart:
420,
The adapter plate and the high pressure side of the compressed intake air?

If any one can get pictures sooner (I hate that word) please jump in.


Yes thats what I want, mainly where the IC hose clamps on. It just looks to me like Ill only have about a half inch of the IC hose on the compressor housing. So I just want to see someone elses before I attempt mine. Thanks


------------------
88 5-spd. bypassed BCS, cleared cat, Gillis valve,ranger roller, Walbro 255lph fuel pump, Kirban AFPR, freshly rebuilt .60/.63 T-3, ported intakes, exhaust, and head soon.
88 5-spd. Precision SC-50 ball bearing turbo, gillis, full 3" exhaust w/ 3- 1/2 crome tip, ported E-6, ported big exhaust valve head, ranger roller cam, Essy cam gear, K&N cone in front of the radiator, gutted upper, knife edged lower, Walbro 255HP pump, Kirban AFPR, Forge BPV, PA Performance 130 AMP Alt...
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB