|
where do i get caster camber plates from for a 88tc. im looking to lower it the right way. i have the eibach springs and all new bushings. new tyrods and sway bars. all i need are some new shocks and struts. if any one has used ones lying around in good shape let me know. i know i shouldnt buy used shocks but at this point ill take the chance. my walet is on extra E thanks for any help
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
CC plates = Kenny Brown, see Vendors page for link
------------------
NATO Member. it's not a vice, it's an obsession
"The nice thing about each new day is nobody ever used it before" Barnaby Jones
88 TC X 2, 86 SVO, mods list at
http://www.turbotbird.com/showroom/pd_88tc.htm
Pete Dunham
|
B D
Joined:
Apr 2001
Covington,GA USA
|
|
Maximum Motorsports. I got a set, I have not put them on yet, but they are nice.
B.D.T.C
------------------
NATO Member
87 TC 5-Speed, Remote mount K&N filter system,Steeda Shifter
88 Thunderbird Sport 5.0
91 Ranger
87 Turbocoupe 5-Speed, Remote mount K&N filter system,Steeda Shifter,New Heater Core,new clutch.
88 Turbocoupe "Mach 1 SE "
88 Thunderbird Sport 5.0 (Retired)
91 Ranger
NATO Member
|
kibstone
Joined:
Apr 2001
Coatesville, PA USA
|
|
I'm with Pete - Kenny Brown hooked me up with springs, struts and the rear lowering kit as well. They also sell spring spacers to allow the front height to be fine-tuned. Great folks to work with and very patient!
My $0.02...
Keith
88 TC, mostly stock. Future plans include: Eibach Front Lowering Kit; Gillis Valve; 2.5" Stainless Cat-Back Exhaust (done); T3 turbo; Ported/Polished head work; port-matching on all pieces; and the list could go on and on and on...
|