Ricky03
|
Joined:
May 2004
Bumpass, Va. U.S.A.
|
|
Ride control struts are shot. What is a good replacement strut and will struts for a SN95 fit? If not, what about fox mustangs
88TC :5 speed swap,255 walbo fuel pump, 3" down pipe with 2 1/2"duals, Ported upper and lower intake, ported E-6, Kiben adjustable fuel pressure regulator,T-3 turbo,Forge BPV,Steeda Tri-x shifter,Autometer gauges,Racer Walsh stage #2 cam, Spec stage 3 clutch,Stinger FMIC
|
boosted chicken
|
Joined:
Jan 2006
Odessa, Texas
|
|
Everything I read says if your TC is stock ride height, SN95 struts will work and if your TC is lowered 1-1.5", a fox Mustang strut will work as it is bit shorter than the SN95 strut.
88 TC#1 2.9L tall deck. Essy SVO head, Boport header, BW SX369 turbo, C4 trans, MS2xtra
88 TC#2 drag car project(someday)
88 TC#3 parts car (just needed the header panel...bought the whole car, lol)
|
|
|
boosted chicken Wrote:Everything I read says if your TC is stock ride height, SN95 struts will work and if your TC is lowered 1-1.5", a fox Mustang strut will work as it is bit shorter than the SN95 strut.
Are the fox struts made to handle the weight differently? Im pretty sure the SN95s are a bit heavier than the foxes and wouldnt that adversely affect the handling if we ran fox struts?
Konis yellows,reds,KYBs,Billstiens..the world is your oyster..
Ive got Tokicos meant for a Fox and either these things are already beat or my Tbird is too heavy for them but it can be a bit bouncy. Im currently thinking about getting some new struts myself. Konis=big $$ but they are one of the best
88 5 speed TC
-3" DP,lowered, 255 Walbro, Gillis valve, Cobra R's, bondo/rust, Stinger's PIMP Ecu
|
