North American Turbocoupe Organization



Stinger Performance now on NATO
martin0660 Offline
Posting Freak
#11
Quote:Originally posted by Stinger:
Some of you guys already know who I am.
Many of us are just figuring it out

BUYER BEWARE

http://natomessageboard.com/ultimatebb.p...3;t=000023

Bob Myers
Reply

ronsnuturbo Offline
Junior Member
#12
Have bought a complete ( down pipe to split pipe for mufflers) exhaust system from Stinger Performance, this is the dual exhaust kit he offers with 3" DP and 2.5" dual exhaust. While I did modify the kit to use a 3" cat other than that there was very little tweaking required and it turned out to be the nicest custom exhaust I have ever done. I have also purchased his oil return line and flange kit, another great fit. I will do business with him again and think that his work is a great asset to the 2.3L turbo community.
I am anxiously waiting the completion of his FMIC kit for the 1988 model year TC as I will purchase 1 for all three TC's I own.

See ya,

Ron
Reply

turbokev Offline
Senior Member
#13
I bought his single exhaust kit consisting of a 3" down pipe and a 3" midpipe.

Shipping was quick, parts fit as advertised.

Only thing that could be better is the midpipe..I had a couple quick bends put in it to get the muffler to sit up in it's cavity a little better and to gain ground clearance.

See pictures at links below:

http://home.comcast.net/~redlineguy/AnsaE.jpg

http://home.comcast.net/~redlineguy/AnsaF.jpg
(you can see the bends in this picture to tuck the muffler up)

Probably not 'needed' on all applications but I'm picky Smile


I also ordered the FMIC kit for my 86 TC.. First impression is good. The IC itself is top notch, very nice. The piping is all bent well and the clamps/hoses are good also. I had him add a bung for my BPV and the weld looks fine.

So far all I've done is prep and paint the piping.

I'll be doing a complete write up on the FMIC setup once I get the time to actually install it.
Kev Schofield
1989 Corvette
----------------

85, 2x86, 87 & 88
(former TC's)
----------------
Reply

trashline Offline
Posting Freak
#14
Quote:Originally posted by turbokev:
I bought his single exhaust kit consisting of a 3" down pipe and a 3" midpipe.

Shipping was quick, parts fit as advertised.

Only thing that could be better is the midpipe..I had a couple quick bends put in it to get the muffler to sit up in it's cavity a little better and to gain ground clearance.

See pictures at links below:

http://home.comcast.net/~redlineguy/AnsaE.jpg

http://home.comcast.net/~redlineguy/AnsaF.jpg
(you can see the bends in this picture to tuck the muffler up)

Probably not 'needed' on all applications but I'm picky Smile


I also ordered the FMIC kit for my 86 TC.. First impression is good. The IC itself is top notch, very nice. The piping is all bent well and the clamps/hoses are good also. I had him add a bung for my BPV and the weld looks fine.

So far all I've done is prep and paint the piping.

I'll be doing a complete write up on the FMIC setup once I get the time to actually install it.
Cool, Ive been working with him for a little while on the setup in my bird. he is willing to listen and I have yet to have a problem with Shannon. I realize there may be bad blood on here but He is willing to admit to his mistakes and fix them.

The kit as of now looks like the charcoal box has to be moved back after that I didnt have to trim anything.

I will let Shannon explain everything when the time comes. And expect alot of pictures. I dont want any question untouched, or not visiable about fitment and so forth.

Kevin good luck with the install if you have any questions, I did have this entire thing on my car just let me know.
Brian

www.BCPCustom.com

06 Cobalt SS
66 mustang 289 C4 handfully modded

Stingers IC install and tbird photos
http://community.webshots.com/user/trashline
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB