North American Turbocoupe Organization



Starter motor
lostfrommd Offline
Junior Member
#1
Ok so i am new to this working on my own car thing.

Where is my Starter motor located on my 87 TC?
I either cant find it cause cause i got the wornf one to replace with or something
any help anyone? My manuel syas its is just a few bolts to switch out the old for a new one.
Thanks!

-Russell
Reply

trashline Offline
Posting Freak
#2
The starter is on the passanger side attached to the bell housing. If you look under neath you will see te down pipe from the turbo it is right next to that. should have three 13MM bolts holding it on. Is a little tight but you can get int here and remove the old one.
Brian

www.BCPCustom.com

06 Cobalt SS
66 mustang 289 C4 handfully modded

Stingers IC install and tbird photos
http://community.webshots.com/user/trashline
Reply

Ryan H Offline
Posting Freak
#3
It helps tons to take the cross bar under the oil pan off (two 15mm bolts). The bolts are in there pretty tight so you'll need a breaker bar or equivalent to get them off.

I actually just take one bolt out and loosen the other and swing the bar out of the way, and stick the loose bolt back in the hole so it doesn't get lost.
'88 TC Smile Walbro 255HP, Stinger FMIC, PIT BOV, Pro 5.0, Kirban, RR cam, FRPP strut tower brace, T3
Reply

tps87turbo Offline
Posting Freak
#4
Ryan's right. Removing the Cross Bar makes it much easier to get the damm thing out & back in. Don't ask me how I know, I've change mine 3 times since I put the car on the road. Make sure you buy a good starter, one with a lifetime warranty.
Tony Sceia -

HIS Red 88 TC
http://turbotbird.com/showroom/data_r-z/...a_88tc.php
HERS - Blue 87 TC, fully loaded with every option, Work in Progress
87 Gray TC Parts Car - Gave to BJL and is now his daily driver
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB