Thanks, I wasn't sure either but it was time to make a choice before paint and I figured I'd give it a go. I was tough to really visualize it before drilling the holes because it stood too high on the studs. I used a step drill on the underneath side for access holes for the socket, and found some plastic snap in covers so you can't see the holes. I got them at sears hardware (the full hardware store) because it was 2 miles away. I'm sure any hardware store has something similar. One thing I haven't done yet is try to adjust the trunk springs. Believe it or not even though its light but since it's intalled far from the pivot point, the trunk doesn't stay raised. Low on the priority list right now... good luck with whatever you go with.
-88 TC Black
5spd, Precision SC50 T3/T4, QH/SD Tune, Gillis, AFPR, 255FP, WB O2, K&N, Ported E6, 3" DP, ATR 2.5" Duals, 3:73 Rear, Konis, Eibachs, 18" Voxx Wheels, X Drilled Rotors.
-06 G35 Coupe Diamond Graphite
-97 Pathfinder
5spd, Precision SC50 T3/T4, QH/SD Tune, Gillis, AFPR, 255FP, WB O2, K&N, Ported E6, 3" DP, ATR 2.5" Duals, 3:73 Rear, Konis, Eibachs, 18" Voxx Wheels, X Drilled Rotors.
-06 G35 Coupe Diamond Graphite
-97 Pathfinder