North American Turbocoupe Organization



South central PA TC meet....time and location
Glenn 88TC Offline
Posting Freak
#1
We are looking to have a little get together for the south central PA and northern MD TC enthusiasts. This meeting is scheduled for Sun. April 27th at Longs Park in Lancaster, PA (http://www.longspark.org/direct3.html). Starting time is 1:30PM and will last till whenever. Location within the park is to be determined. There are a few different lots for parking and we will have to just show up and find an empty one. Scott and I will be there plenty early to avoid people sitting in different lots. In the event of rain that day I will probably say to not show up. I'm pretty sure most of us don't want to stand in the rain. Any friends with a 2.3turbo car are also invited.

Any questions email me at [email protected].
For directions email Scott at [email protected]
NO TC and NO headaches.
Reply

Dan S Offline
Administrator
#2
Glenn,

Count on Diana and I to be there, but if it rains, we agree with you!

------------------
Dan S
NATO Member
84 and 88 Turbo Coupes
(87 TC parts car)
It's no longer a hobby, now it's an osbession!
Dan S
Custom 88 TC, Mandarin Copper Pearl Metallic
http://natomessageboard.com/ubbthreads.p...5#comments
1972 Ford F-100 SWB Styleside
2015 BMW 435i Hardtop Convertible 
2022 Escape Titanium Elite
Reply

Glenn 88TC Offline
Posting Freak
#3
Yours would make 6 TC's then. I have yet to hear from about 10 more.

------------------
Glenn 88TC
current mods: ported & polished big valve head(1.89/1.59), ranger roller, custom upper and ported lower intakes, t3/t4 turbo, powerstroke intercooler mounted full size, 60mm throttle body, R.C. Engineering 42lb. injectors, MSD 6al, MSD Launch Control, MSD 8.5mm wires, K&N filter, Walboro 255HP pump, Kirban adj. fuel reg., ATR header, full 3" exhaust with Dynomax Ultraflow muffler, Star stage III clutch, Hallman boost controller, Flex-a-lite adj. temp switch for stock fans, Weld Draglites with M/T ET Street 26x11.5/15

87 Merkur Xr4ti - daily driver
NO TC and NO headaches.
Reply

slacken00 Offline
Senior Member
#4
count me in ill be there
88 tc black, sc50, stinger 3 inch ex, 255 lph fp, kirban afpr, bov, ported big valve head w/a237 cam, gutted upper intake, (knife edged lower, 75 pph inj. not on yet), spec 3 clutch, street tires best run 13.9, best mph. 109.5(no tuning)

http://s186.photobucket.com/albums/x147/...t=1073.jpg

2008 ford edge sel awd
2000 ford mustang gt,exhaust intake chipped
Reply

Glenn 88TC Offline
Posting Freak
#5
Quote:Originally posted by slacken00:
count me in ill be there

Great!!

I tried emailing you but the one in your profile didn't work.

------------------
Glenn 88TC
current mods: ported & polished big valve head(1.89/1.59), ranger roller, custom upper and ported lower intakes, t3/t4 turbo, powerstroke intercooler mounted full size, 60mm throttle body, R.C. Engineering 42lb. injectors, MSD 6al, MSD Launch Control, MSD 8.5mm wires, K&N filter, Walboro 255HP pump, Kirban adj. fuel reg., ATR header, full 3" exhaust with Dynomax Ultraflow muffler, Star stage III clutch, Hallman boost controller, Flex-a-lite adj. temp switch for stock fans, Weld Draglites with M/T ET Street 26x11.5/15

87 Merkur Xr4ti - daily driver
NO TC and NO headaches.
Reply

JDR Offline
Junior Member
#6
I'm going to try to be there, weather permitting, though I won't have the TC on the road yet. Isn't this the same weekend as Spring Carlisle Swap Meet?
'88 Turbo Coupe
'67 Cougar
'71 Torino 500
'07 Chevy Silverado
'00 Dodge Intrepid
Reply

FlyByeBoy Offline
Member
#7
So that means us boys from Ohio are not invited?
Not So Stock 88 TC. 94 SHO w/5speed. (NATO Member)
Reply

Glenn 88TC Offline
Posting Freak
#8
Quote:Originally posted by FlyByeBoy:
So that means us boys from Ohio are not invited?

Anyone is invited. I didn't think anyone would want to drive over 4 hours to attend. That is the only reason I didn't mention OH. I didn't even think the Pittsburgh people would want to drive that far.

------------------
Glenn 88TC
current mods: ported & polished big valve head(1.89/1.59), ranger roller, custom upper and ported lower intakes, t3/t4 turbo, powerstroke intercooler mounted full size, 60mm throttle body, R.C. Engineering 42lb. injectors, MSD 6al, MSD Launch Control, MSD 8.5mm wires, K&N filter, Walboro 255HP pump, Kirban adj. fuel reg., ATR header, full 3" exhaust with Dynomax Ultraflow muffler, Star stage III clutch, Hallman boost controller, Flex-a-lite adj. temp switch for stock fans, Weld Draglites with M/T ET Street 26x11.5/15

87 Merkur Xr4ti - daily driver
NO TC and NO headaches.
Reply

Glenn 88TC Offline
Posting Freak
#9
Quote:Originally posted by JDR:
I'm going to try to be there, weather permitting, though I won't have the TC on the road yet. Isn't this the same weekend as Spring Carlisle Swap Meet?

I have no idea about the Spring Carlisle thing. I only attend the Ford event. Hope to see you there. You should swing by the house sometime. I'll take you for a spin in the TC.

------------------
Glenn 88TC
current mods: ported & polished big valve head(1.89/1.59), ranger roller, custom upper and ported lower intakes, t3/t4 turbo, powerstroke intercooler mounted full size, 60mm throttle body, R.C. Engineering 42lb. injectors, MSD 6al, MSD Launch Control, MSD 8.5mm wires, K&N filter, Walboro 255HP pump, Kirban adj. fuel reg., ATR header, full 3" exhaust with Dynomax Ultraflow muffler, Star stage III clutch, Hallman boost controller, Flex-a-lite adj. temp switch for stock fans, Weld Draglites with M/T ET Street 26x11.5/15

87 Merkur Xr4ti - daily driver
NO TC and NO headaches.
Reply

JDR Offline
Junior Member
#10
Glenn, I just might do that one day. I already know where you live. My wife and I hit the flea market at the Sunset Market pretty often so I drool over your car from a distance when it's out.

------------------
88 Turbo Coupe
Stock
Work in progress
'88 Turbo Coupe
'67 Cougar
'71 Torino 500
'07 Chevy Silverado
'00 Dodge Intrepid
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB