North American Turbocoupe Organization



SEARCHED CAN'T FIND
turbocoupes Offline
Senior Member
#1
Am in the process of building an engine at work and it seems I forgot to order the O rings for the oil cooler??? found where Pete posted #s for the large one but how bout the small one??? Are they still available and where or does anyone have these in their home stock willing to sell?

------------------
Garry McVey "BIRDS OF A FEATHER" Birdoprey always in flight... TBird TC owners are usually wingin' it
TC's 83 project, 86 donor for 83, 86 FUN street car,87 RIP, 87 blue to be stock street car, 87 red donor for blue and others, 87 red daily driver, 88 street and strip HALF WICKED right now, 87 XR4ti project,80 pinto wgn project
Garry McVey "BIRDS OF A FEATHER" TBird TC owners are usually wingin' it
TC's 83 project, 86 donor for 83, 86 FUN street car daily driver with speed equipment from Red 88 donor, 87 blue to be stock street car, 87 red donor for blue and others, 87 red donor, 88 street and strip(now a donor) 14.01 chasin 13.0's, 87 XR4ti project,
Reply

Pete D Offline
Administrator
#2
Garry, I'm not remembering a small one but try a hydraulic shop or industrial supply that has hydraulic parts
Pete Dunham


Reply

turbocoupes Offline
Senior Member
#3
Thanks Pete ! I didn't think of that! The retainer "shaft" has a recessed area under the "nut" portion and I couldn't remember if it had an o ring or not...this engine has been inprogress for about a year...I piddle on it at work when there is no paying customer work...I'll pull the cooler off an engine I have in the garage and make sure. You always up at 4 in the morning?

------------------
Garry McVey "BIRDS OF A FEATHER" Birdoprey always in flight... TBird TC owners are usually wingin' it
TC's 83 project, 86 donor for 83, 86 FUN street car,87 RIP, 87 blue to be stock street car, 87 red donor for blue and others, 87 red daily driver, 88 street and strip HALF WICKED right now, 87 XR4ti project,80 pinto wgn project
Garry McVey "BIRDS OF A FEATHER" TBird TC owners are usually wingin' it
TC's 83 project, 86 donor for 83, 86 FUN street car daily driver with speed equipment from Red 88 donor, 87 blue to be stock street car, 87 red donor for blue and others, 87 red donor, 88 street and strip(now a donor) 14.01 chasin 13.0's, 87 XR4ti project,
Reply

Jeff K Offline
Administrator
#4
I just replaced the oil cooler to block gasket last weekend, and I didnt see any small O ring on the shaft.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 21 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 04 Taurus Duratec (wifes car)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

TurboCoupe50 Offline
Posting Freak
#5
Quote:Originally posted by turbocoupes:
You always up at 4 in the morning?

Nawww... Pete has learned how to reset the time on the board so it just looks like he always at the computer... [Image: biggrin.gif]



------------------
Three 1988 Turbo Coupes .....
And now a 1987
1988 Turbo Coupe331 AOD

1972 Comet GT

1969 Fairlane Cobra 428CJ 4-Speed
Reply

Pete D Offline
Administrator
#6
Quote:You always up at 4 in the morning?

Up to make a f$%&*##@ miserable trip to Columbus for that swap meet. Snow, ice and rain all the way, both ways. almost more cars in the ditches than on the road. Just got home and damn glad I made it.
Pete Dunham


Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB