cloud17
Joined:
May 2003
Parma,OH
|
|
my passenger side rear brake was grinding so i took a look at it and found out that the bottom bolt that holds the caliper on must have vibrated out.does anyone know what size it is so i can replace it? maybe a ford part number? thanks much.
|
tps87turbo
Joined:
Feb 2003
Hammonton, NJ USA
|
|
You should be able to get them at any parts store. I believe Napa, Advanced Auto, Autzone, Pep Girls (I mean Boys) sells a rear brake hardware kit. I would bring in the one from the other side to verify that you get the right one.
------------------
Tony Sceia
Red 88 TC, Med Red with Raven Leather & every option, Walbro 255, 3" SS Downpipe with Magnaflow Dual SS 2.5 Cat Back system, 3-core Radiator, Star Stage 3 Clutch, Rebuilt T-5 Tranny, 4:10 rear, 140 MPH Speedo, New Paint, Headlights, Refinished Snowflakes & New Tires.
She looks so SWEET. Now I need to make some more HP & make the engine look good.
|
cloud17
Joined:
May 2003
Parma,OH
|
|
autozone wasn't able to match it up with anything.is stuff like that really that hard to find for these cars? i torqed the top bolt down pretty hard for now to keep it in place.no grinding as of yet.
[This message has been edited by cloud17 (edited 06-30-2004).]
|
PetzJC
Joined:
Feb 2004
California, MD
|
|
How about taking one of the bolts to a good hardware store (Ace, True Value, etc) and just matching it up with what they have in the bins......
------------------
88 Silver T/C, original owner, 254,000 miles
Loaded except leather & auto trans
K&N, Gillis, SVO roller #1, big SS valves, ported intake, head, & exhaust
Polyurethane bushings throughout, Goodyear GT-HR 235/55R16's
Former owner of 88 Silver T/C, loaded (except leather & A/T), original owner, 294,815 miles!!!
K&N, Gillis(18 psi), SVO roller #1, big SS valves, ported intake, head, & exhaust.
Short block & turbo original/untouched, spec-II/III clutch combo.
Polyurethane bushings throughout, Goodyear GT-HR 235/55R16
|