black88tc
|
Joined:
May 2005
orangeville,pa,united states
|
|
i was lookin at a ranger at a junk yard with a 2.3 and seen that they have an aluminum water pump would these work on are cars or not? i just don't know if they would flow enough water or not. i just am wanting the wait savings. thanks for the help
|
Ryan H
|
Joined:
Oct 2004
Panama City, FL
|
|
If it is the same 2.3 block, then why wouldn't it? What year Ranger is it?
------------------
Ryan Harris
88 TC, 5 speed, B&M Ripper Shifter, Walbro 190 LPH, K&N, 3.73's, 88K miles
Awaiting install: Volvo FMIC, Walbro 255 HP, Kirban Adj. FPR
'88 TC  Walbro 255HP, Stinger FMIC, PIT BOV, Pro 5.0, Kirban, RR cam, FRPP strut tower brace, T3
|
THUNDERPINTO
|
Joined:
Nov 2004
KENT ,NY, USA
|
|
the bolt pattern for the pullys may not match or the center stud may be smaller ,,,, Quote:Originally posted by black88tc:
i was lookin at a ranger at a junk yard with a 2.3 and seen that they have an aluminum water pump would these work on are cars or not? i just don't know if they would flow enough water or not. i just am wanting the wait savings. thanks for the help
2 87 TC's one is a Watkins Glen
88 TC no engine or interior,a no rust project
66 mustang coupe,71 triumph spit
52 Dodge powerwagon(s)
79 TC powered Pinto
99 Harley Roadking
73 750 Norton Commando Combat
|
black88tc
|
Joined:
May 2005
orangeville,pa,united states
|
|
i'm not sure what year it is. i think a 94 or newer. i can get one for about $20. so i might buy it to try and see what happens. and see if it will work.
|
