John B
Joined:
Dec 2015
New Jersey
|
|
(12-22-2021, 07:36 AM)Cleven Wrote: Anything left?
Anything in particular that you're looking for?
I sold the e6 manifold and IHI turbo as well as the wheels and tires. I have everything else listed and an older e3 manifold and t3 turbo (needs a rebuild). Let me know if there's anything else, you might be looking for.
88 Turbo Coupe: Front mount intercooler, MGW short throw shifter, full coilover conversion, tubular control arms front and rear, svo front brakes, vacuum assist brake swap, manual steering swap, GT35R turbo with external gate, pimpx ecu, 60lb injectors, 3 core aluminum radiator, Boport 1.5 cam, gutted upper, corbeau fixed back seats, and the list goes on.
|
|
(11-24-2020, 07:53 PM)John B Wrote: Selling some random parts for sale:
-LA2 ECU - $50 + shipping
-E6 manifold with IHI turbo - $75; local pickup only. Manifold had a small (less than .5 inch) hairline crack that I had repaired. IHI turbo worked fine when removed from car but seems to be leaking through the rear center housing seal (unknown miles on turbo)
-Upper Intake Manifold - $50 + shipping. Painted wrinkle black. Stock orientation unit from 88TC
-Teves II unit - $50; local pickup only. Worked fine when removed from car (upgraded to vacuum assist system). ABS light was on but I'm not sure if this was caused by the Teves unit. I do not have the plastic reservoir.
-Big VAM meter - $25 plus shipping. Removed from my 88TC when pimpx ECU was installed.
-Stock 88TC injectors - $25 plus shipping. These are the brown top 35lb/hr low impedance injectors
-Stock 16 inch Snowflake Rims - $100; local pick up only. 225/60R16 Bridgestone Weatherforce tires with 50-60% tread are currently installed. Comes with all centercaps.
-Ford OBD1 code reader. - $25 plus shipping. Comes with instruction manual
I can try to get pictures of items but majority are in storage so that will take some time if requested.
I really need the little plastic piece that its connected to a hose coming out of the abs. Any chance you have it?
|
|
If you know somewhere I could get the part that would also be great. Again, the plastic piece near the driver side fender. Connected to a hose attached to the abs.
|
John B
Joined:
Dec 2015
New Jersey
|
|
Do you happen to have a picture of it? I'm not sure if I have it but I can check this weekend when I get back to my storage unit.
88 Turbo Coupe: Front mount intercooler, MGW short throw shifter, full coilover conversion, tubular control arms front and rear, svo front brakes, vacuum assist brake swap, manual steering swap, GT35R turbo with external gate, pimpx ecu, 60lb injectors, 3 core aluminum radiator, Boport 1.5 cam, gutted upper, corbeau fixed back seats, and the list goes on.
|
88turbomajor
Joined:
Jun 2020
Creedmoor, NC
|
|
(01-04-2022, 12:41 AM)drewdog83 Wrote: If you know somewhere I could get the part that would also be great. Again, the plastic piece near the driver side fender. Connected to a hose attached to the abs.
Hi Drew,
I have that piece. It's on my ABS module. I sent you a PM.
1984 Mercury Cougar 5.0L LS Silver/Gray
(New 5.0L long block with E7 heads, HO cam with Flowmaster Super 10's)
Previous: 1988 Turbo Coupe
|
|
Any chance you have a power antenna switch for an 87/88 ? I just found out the bezel assy was changed from the 85/86 model and those switches won’t fit in the later assemblies.
John
[email protected]
|
John B
Joined:
Dec 2015
New Jersey
|
|
Unfortunately, I do not have a power antenna switch
88 Turbo Coupe: Front mount intercooler, MGW short throw shifter, full coilover conversion, tubular control arms front and rear, svo front brakes, vacuum assist brake swap, manual steering swap, GT35R turbo with external gate, pimpx ecu, 60lb injectors, 3 core aluminum radiator, Boport 1.5 cam, gutted upper, corbeau fixed back seats, and the list goes on.
|
|