Product survey, please respond. Thank you!

I have gotten a firm to make new decals for the center console plates (single and dual power seat) as well as the door lock covers and switches. Problem is, they are prohibitively expensive to design but once done, will be cheap to make. Retail will be $29.95 for the center console or door lock set or $55 for both. Initialy just the original black w/white lettering will be available, but I can have carbon fiber/white and turned aluminum (match the dash face)/black made at no additional costs. I will be taking a huge gamble that my small company just cannot afford if they don't sell. So, who wants some? Anybody willing to make pre-orders? Please let me know your opinions (as well as your wallets opinion).

------------------
Michael Pinto
www.aerobirdmotorsports.com

1988 Med Red/Red leather 5Spd, all options, getting fresh motor
1987 Code 33 Silver-Blue/Charcoal cloth auto, undergoing race engine/5Spd swap
1988 White/Charcoal cloth auto, g/f's car, HL mod, Clarion CD/Stereo
1988 Shadow blue/blue cloth 5Spd, hit by truck, missing engine, for sale
1984 silver/grey leather, 5Spd, parts car
1992 Dk Green SHO 3Spd, feature car, 13.37 @104

RIP-1988 Med Red/Charcoal cloth 5Spd, all options, McK kit, spoiler

I'd like to see some pics, but sounds good.

------------------
Current: 85 XR 7
Time to clean 'er up in time for Carlisle...that and I have to wait on a new clutch before I put her back together...

If you have a steady hand and use some care you can use press on lettering and then spray a clearcoat over it. I've done this many times on prototype projects and it looks professional when done properly, and is a lot less expensive. IMO the NRE charges are going to kill you.

Just my 2¢ worth.

------------------
Joe F.

JR's Place - My 87 TC

I would be interested in a replacement plate for My TC. I would like to see a picture first though.

------------------
85TC, Custom cold air intake,K&N Cone, Intercooled, Gillis Boost Valve 18PSI, Spearco BPV, Full 3" Exhaust,with a Vortex Muffler, Looking for more Boost! NATO member (Chris Taylor)
86 Camaro, 5.0L, 4bbl, K&N, MSD 6200 6A, Dynomax cat back system, Pace Setter Shorty Headers....Camaro is for sale !

I would be very intersted in a set.Of course I am like everyone else, I would also like to see a sample.
Thanks,
Chris

I'd be interested in 3 to 6 full sets...not all at once though...show me quality...I'll buy!

------------------
Garry McVey "BIRDS OF A FEATHER" Birdoprey always in flight... TBird TC owners are usually wingin' it
TC's 83 project, 86 donor for 83, 86 FUN street car,87 RIP, 87 blue to be stock street car, 87 red donor for blue and others, 87 red daily driver, 88 street and strip HALF WICKED right now, 87 XR4ti project,80 pinto wgn project

Moved to the new Vendors Presentations and Offerings forum. This new forum is for all Vendor product updates and any kind of product interest surveys and to announcements that there are new posts in the new forum. The General Forum is off limits for these kind of posts

I also would be interested in a couple sets of the decals let us know when you get some pictures.

I am also interested. send pics when you have them.

Like other quite interested but want to see a picture...also curious what material the decal is made of