Bungy
Joined:
Oct 2010
Minnesota
|
|
I need to replace the hard lines going across the rear diff on my 86 TC. I have found pre-bent lines for all years of Mustang but nothing for the TC. So my obvious question is, will lines for an 86 Mustang fit my 86 TC?
1986 TC 100% Stock
"Nitrous is for guys who can't build motors"
|
Robert Camp
Joined:
Jan 2006
Raleigh, NC
|
|
A place called inline tube can duplicate you lines if they are structurally still sound and you box them up so they are not damaged in transit. Not too expensive, at least when I used them.
Robert Camp
'86 Medium Regatta Blue TC, 5-speed, original owner.
|
Bungy
Joined:
Oct 2010
Minnesota
|
|
thanx for the info. I checked their website and that looks real promising. Problem is getting the lines off in good condition. I already twisted off one fitting right at the wheel cylinder.
After all this @#$! snow melts (another 10"+ pedicted today) I'm going to check my brothers Mustangs. He has four all different years, so hopefully one of those will work.
1986 TC 100% Stock
"Nitrous is for guys who can't build motors"
|