|
|
Looks like I have a bad actuator and have tried to fix it based on all the great advice here on the site, but to no avail.
If you have a Front Drivers Side ride control actuator, please let me know.
Thanks,
Joe
|
Kuch
|
Joined:
Sep 2016
Manlius, NY USA
|
|
I have all of mine when I went over to Koni's. Do you know if they are the same driver's side vs. pass side? I never labeled them, but you can have one, just give me $5 to ship. Hit me with a PM if interested
1988 Turbo Coupe, Black/Black, 5 Speed, Moonroof, T3/T4, ported E6, 255LPH, Kirban, Stinger Exhaust, MGW shifter, K&N, Gillis valve, BP1.5, PIMPx, Koni's
1964 Ford Galaxie 500XL, 390 6V, Big Solid cam, Headers,3.89's, 4 Speed, Vast and fast
1960 Ford Starliner, 292 Y Block, 312 4bbl intake, headers, 3 Speed, slow and low
|
|
|
(08-06-2020, 06:35 PM)Kuch Wrote: I have all of mine when I went over to Koni's. Do you know if they are the same driver's side vs. pass side? I never labeled them, but you can have one, just give me $5 to ship. Hit me with a PM if interested
Thanks Kuch,
It looks like they are wired the same so it really doesn't matter which one you send. Thank you for the offer.
I can send a prepaid box if you like. Just need your address. Then you don't have to mess with it.
ok?
Joe
|
Kuch
|
Joined:
Sep 2016
Manlius, NY USA
|
|
PM sent
1988 Turbo Coupe, Black/Black, 5 Speed, Moonroof, T3/T4, ported E6, 255LPH, Kirban, Stinger Exhaust, MGW shifter, K&N, Gillis valve, BP1.5, PIMPx, Koni's
1964 Ford Galaxie 500XL, 390 6V, Big Solid cam, Headers,3.89's, 4 Speed, Vast and fast
1960 Ford Starliner, 292 Y Block, 312 4bbl intake, headers, 3 Speed, slow and low
|
Jeff K
|
Joined:
Apr 2001
Milwaukee, WI
|
|
FYI, all PRC actuators are identical.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|
Kuch
|
Joined:
Sep 2016
Manlius, NY USA
|
|
Perfect, Thanks Jeff
1988 Turbo Coupe, Black/Black, 5 Speed, Moonroof, T3/T4, ported E6, 255LPH, Kirban, Stinger Exhaust, MGW shifter, K&N, Gillis valve, BP1.5, PIMPx, Koni's
1964 Ford Galaxie 500XL, 390 6V, Big Solid cam, Headers,3.89's, 4 Speed, Vast and fast
1960 Ford Starliner, 292 Y Block, 312 4bbl intake, headers, 3 Speed, slow and low
|
Kuch
|
Joined:
Sep 2016
Manlius, NY USA
|
|
88Turbo, I received your package and sent out two actuators in the mail today. There was room in the box and I don't need them. Hope they work out for you.
1988 Turbo Coupe, Black/Black, 5 Speed, Moonroof, T3/T4, ported E6, 255LPH, Kirban, Stinger Exhaust, MGW shifter, K&N, Gillis valve, BP1.5, PIMPx, Koni's
1964 Ford Galaxie 500XL, 390 6V, Big Solid cam, Headers,3.89's, 4 Speed, Vast and fast
1960 Ford Starliner, 292 Y Block, 312 4bbl intake, headers, 3 Speed, slow and low
|
|
|
(08-13-2020, 11:32 AM)Kuch Wrote: 88Turbo, I received your package and sent out two actuators in the mail today. There was room in the box and I don't need them. Hope they work out for you.
Much appreciated Kuch! I hope they work too. If not, I'll have to do what you did. Replace the struts and shocks with non-PRC ones.
1984 Mercury Cougar 5.0L LS Silver/Gray
(New 5.0L long block with E7 heads, HO cam with Flowmaster Super 10's)
Previous: 1988 Turbo Coupe
|
|
