North American Turbocoupe Organization



Power seat brackets
RLW3 Offline
Junior Member
#1
Does anyone have seat brackets for a 1985 TC?
RLW3
85 w/88 nose; bal/bp, big valve, Lunati .500 cam; 120º intake; T3/T4E 50 trim; modified Stinger FMIC; DIY cold air; Bart's Works front susp; modified Watts link in rear; Cobra brake kit; Global West subframes; Lear-Siegler Mark VII seats
Reply

50RACER Offline
Senior Member
#2
I have them for 87-88, but not sure if they are the same.
87 TC Medium Canyon Red
88 TC Black Beauty
Reply

RLW3 Offline
Junior Member
#3
I think they are the same. Are you interested in selling them?
RLW3
85 w/88 nose; bal/bp, big valve, Lunati .500 cam; 120º intake; T3/T4E 50 trim; modified Stinger FMIC; DIY cold air; Bart's Works front susp; modified Watts link in rear; Cobra brake kit; Global West subframes; Lear-Siegler Mark VII seats
Reply

50RACER Offline
Senior Member
#4
Yes. I have them for sale on ebay now if you use them. The links are below. Shipping on these things is a little pricey due to the size and weight. The ones that I have were all working perfectly when I pulled them from the cars. They all have a little surface rust on them, but that would clean up easily with a little effort.

https://www.ebay.com/itm/192404818130?ss...1555.l2649

https://www.ebay.com/itm/202154361986?ss...1555.l2649
87 TC Medium Canyon Red
88 TC Black Beauty
Reply

RLW3 Offline
Junior Member
#5
How much would you want for both of them?
RLW3
85 w/88 nose; bal/bp, big valve, Lunati .500 cam; 120º intake; T3/T4E 50 trim; modified Stinger FMIC; DIY cold air; Bart's Works front susp; modified Watts link in rear; Cobra brake kit; Global West subframes; Lear-Siegler Mark VII seats
Reply

RLW3 Offline
Junior Member
#6
Also, would you happen to have the wiring that goes from the center console to the passenger seat?
RLW3
85 w/88 nose; bal/bp, big valve, Lunati .500 cam; 120º intake; T3/T4E 50 trim; modified Stinger FMIC; DIY cold air; Bart's Works front susp; modified Watts link in rear; Cobra brake kit; Global West subframes; Lear-Siegler Mark VII seats
Reply

50RACER Offline
Senior Member
#7
I would take $30 each for them plus shipping. If you look at the ebay listings, you can see how much shipping to your address would be. These things are fairly heavy, about 19 lbs. each, I think so they would need to be shipped in separate boxes. I've looked at shipping two in the same box before and the cost was much higher.
I do have the wiring. As are the seat bases, it is from 87-88 model cars, but should be the same although I can not say for certain. It would be the harness for both seats. The harnesses come as for a single drivers seat, or the combination of both seats. I will take $20 for the harness.
87 TC Medium Canyon Red
88 TC Black Beauty
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB