88fordTcoupe
Joined:
Feb 2010
ORLANDO,FLORIDA
|
|
Well I no longer have a vam on my car. Im running Speed Density with the factory 8UA/ L series.
EVERY DAY CAR.
|
Timmay
Joined:
Nov 2009
Bolivar, Missouri
|
|
Awesome hows it run?
1988 Turbocoupe- RIP in a place without rust!
1978 Mercury Bobcat super clean-2.3T, t5 trans, 8.8 rear 3.73 gears 31 spline axles,255 walboro in-line,MBC,3 inch exhaust,4 wheel disc brakes,5 lug
|
86XR7auto
Joined:
Mar 2003
Mt. Pleasant, MI. USA
|
|
Sweet.... I bet it spools better without the vam in the way of the turbo.
Travis
|
RDOG
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
Hold up guys! Give us the break down to how this is done. Is there a chip burned? Is there some kind of management system setup? Please expand on this.
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
natmac3
Joined:
Mar 2002
Aberdeen, MD
|
|
Details indeed.
-n8-
1987tc
|
86XR7auto
Joined:
Mar 2003
Mt. Pleasant, MI. USA
|
|
SVOjohn from tf.com is the one that made the code.
Travis
|
Rob..
Joined:
Nov 2009
Naples, Fl
|
|
^Indeed. I(almost) wish I had waited to do my MAF conversion and done this instead. I've driven one of Johns speed density conversions. VERY cool. The parts are cheap, much cheaper than my MAF anyway. All you need is Johns' code, a GM IAT, a GM 3 bar MAP and a way to tune the EEC(wideband required). Throttle response is crisp and (surprise!) as with my MAF conversion, the 2.3 idle hiccup is gone. This further reinforces my thoery that the hiccup is related to the inaccurate metering of air caused by the the VAM and miscellaneous vacuum leaks common to our engines. There are a couple of minor drawbacks. Speed density requires retuning anytime you change something, MAF doesn't. With the increased airflow from taking off that restrictive POS VAM, you'll likely outgrow your stock injectors with a stock cam and 18-20 psi. Mine ran lean WOT at 4200 rpm. ****, I hate it when that happens. 75-85# injectors and a Walbro 255lph pump are essential. Other than that,no worries, have fun.
I want to live in a world where monkeys don't dig up the dead and parade about in their shoes.
88 7F, SS big valve head, port matched in/ex, gutted and powdercoated intake, A-237, stealth T3/T4 Garrett hybrid, Abaco 85mm mass-air meter conversion, tripminder, Walbro 255 high pressure, SVOJohn tuned.
|
88fordTcoupe
Joined:
Feb 2010
ORLANDO,FLORIDA
|
|
Yes this is svojohn's work. I bought a 3bar Gm map sensor on ebay 50.00 Shipped,GM IAT sensor 17.00 Pigtail 6.00,moates f3 chip,and 75lb injectors.This thing runs good,with no problems. But I know as we go further into tuning im going to need a clutch.
EVERY DAY CAR.
|
RDOG
Joined:
Jun 2001
Ontario. California U.S.A.
|
|
Do you know when John plans to do a LA series?
1986 Turbo Coupe. Boport StageIII head, Boport 2.1, Performance Techniques 50 trim hybird, StageII.63, stinger 3" exhaust, Phenolic spacer, Boglog header,NPR FMIC intercooler setup, kirban fpr, bigrmotorsports fuel rail, diablo water meth kit, CAI, remote mount TFI, CHE rear adj control arms, MAC girdle, 8.8 rear disc, aluminum drive shaft, H&R lowerings springs Tbird Turbo Specific, y MAS!!
|
88fordTcoupe
Joined:
Feb 2010
ORLANDO,FLORIDA
|
|
So far he has done the P-series,and the L-series.
EVERY DAY CAR.
|
|