North American Turbocoupe Organization



New uses for that spare turbo
Pete D Offline
Posting Freak
#1
This is only slightly off topic, but it does address one of life's burning issues [Image: biggrin.gif] http://www.asciimation.co.nz/beer/


------------------
NATO Member
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham
Reply

SteveX82 Offline
Posting Freak
#2
You know Pete.....anytime you're bored or anything you can feel free to work on my car. Excellent find, though. Can I even ask how you came upon such a page?

------------------
maroon 1987 TC 5spd, 125k miles

k&n mounted in front of radiator with 3" pvc piping, gillis valve set at 17lbs, kirban adjustable fpr set at ?, walbro 255 hi-pressure pump, crappyass rear tires

Best 1/4 mile: 14.857
Best trap speed: 94.01mph
Estoril blue 1987 TC 5spd, 148k mi, a237, Bailey BOV, spec stg3 clutch, spearco FMIC, 50 trim t3/t4, 3" exhaust, Bamafuel, LM1, 55pph
Best 1/4 mile: 12.31 @ 110mph on 25psi
Reply

Pete D Offline
Posting Freak
#3
It was submitted by a guy on one of the SVO boards.

------------------
NATO Member
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham
Reply

TurboCoupe50 Offline
Posting Freak
#4
Huumm, I have a spare turbo and some warm beer. Honey, I'll be in the garage for a while. Maybe I should just buy one of those mini refigs. I'd probally get drunk and set the garage on fire.

------------------
Two 1988 Turbo Coupes ..... yea one of em has a 5.0 And runs 13.3s
1988 Turbo Coupe331 AOD

1972 Comet GT

1969 Fairlane Cobra 428CJ 4-Speed
Reply

Blade1433 Offline
Senior Member
#5
Thats AMAZING! I'll be out in the garage!

------------------
Blade

"Drive it like you stole it"

88 bone stock TC with 138k, 5spd, burgundy, almost all options with new U-joints, tranny Xmember, front end, FULL tune-up with select MSD products, new horizontal axle shock thingies, custom interior, white face guages. Coming soon: boost guage and air fuel ratio guage on the pillar, Gillis valve, K&N, gutted upper, knife edged lower, gutted E6, T3, and steam cleaned engine bay.
Reply

trbocoup Offline
Member
#6
that's funny! there's a man who really loves his beer!
Just because you're not paranoid,....Doesn't mean they're not after you!
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB