|
Hello all, I'm building a 88 turbocoupe 5spd with 75K on the clock. It has been sitting for quite some time. My goal is to keep it mild and mostly a daily driver. Slowly making progress, I have some pics to share if anyone would like to see.
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
Welcome to the board. Show us the pics! Here is a little "how to" on posting pics. http://natomessageboard.com/ubbthreads.p...Post234870
Pete Dunham
|
|
01-17-2015, 09:40 PM
(This post was last modified: 01-17-2015, 09:48 PM by kevj46774.)
I'am currently switching over to vacuum assist brakes, I was able to free up the stuck abs pump motor only to discover that the abs assembly leaks brake fluid. I also have install the gas tank and fix a brake line just before the rear axle.
Work I've already completed
walbro 255 lph pump
heater core
rear shocks
3g alternator
gaskets on engine
changed trans fluid (T-5)
New clutch/pressure plate
new front/rear brakes/rotors
new rubber brake lines all the way around
new tires (225/55/16) not on rims yet
Alot of work but it's getting there :happydance:
|
Dan S
Joined:
Jan 2003
Harrisburg, PA
|
|
Just in case you need it, the vent valve and grommet for the fuel tank are still available from Ford.
Lots of memories came back when I looked at your pics! Keep up the good work, it's worth it!
:pimp:
|
Not B Anymore
Joined:
Apr 2001
Nokesville, VA, USA
|
|
Welcome!
Brian Leavitt
'86 TC 5-Speed -- MS2x w/COP | 83 lb. injectors | T3/T4 50 Trim Stage 3 .63AR | Full 3" Exhaust - No Cat | Motorsport FMIC | Ranger Roller | Ported E6 | Walbro 255HP | Kirban | 20psi | 120-amp 3G | 8.8" 3.55 rear | '03 Cobra Wheels
|