North American Turbocoupe Organization



New best for the TC!
boosted chicken Offline
Senior Member
#1
Copied and pasted from my TF post!

Dragged the bird to the 1/8th mile last night. Final and best pass of the night:

RT: 1.13
60' 1.57
330' 4.50
1/8 ET 6.99
1/8 MPH 96.3

Super stoked! About time!

My first run:

RT: 2.03
60' 1.79
330' 4.84
1/8 ET 7.39
1/8 MPH 96.8

Second run:

RT: 1.08
60' 1.87
330' 4.98
1/8 ET 7.56
1/8 MPH 96.1

I was having problems with using the nitrous to get up on the converter. That's why the RT was so lousy. When I would hold down the button, the car would go pig rich and when I let go of the t-brake the car was lazy.
I decided on the last pass to just pulse the nitrous button 2 or 3 times while on the brake so it wouldn't have time to over richen everything. It worked in a big way, so I may have to jet down the fuel side of the wet kit. Spray was only used to get up on the converter. It was off when the t-brake released.

I should be in the 10 second 1/4 mile ballpark [Big Grin]
88 TC#1 Boport stg 3 alum dport head, PT6466, Boport header, CP pistons, Crower rods, MS2xtra
88 TC#2 drag car project(someday)
88 TC#3 parts car (just needed the header panel...bought the whole car, lol)
Reply

Stang8u Offline
Senior Member
#2
Crap man that's flying very nice!!!
:mad:
Reply

boosted chicken Offline
Senior Member
#3
A buddy got video. A bit far from the starting line but it works. I had a horrible reaction time so the Malibu jumped out on me pretty good but I caught and passed him before the stripe!
https://www.youtube.com/watch?v=MfidWzp91QY
88 TC#1 Boport stg 3 alum dport head, PT6466, Boport header, CP pistons, Crower rods, MS2xtra
88 TC#2 drag car project(someday)
88 TC#3 parts car (just needed the header panel...bought the whole car, lol)
Reply

Stang8u Offline
Senior Member
#4
Super cool man
:mad:
Reply

natmac3 Offline
Administrator
#5
congrats on making some serious moves... that's rolling! Big Grin
1987tc
Reply

turbird77 Offline
Member
#6
I'm very interested to know what all mods have been done to the motor? Smile
88 TC - Work in Progress.
Reply

boosted chicken Offline
Senior Member
#7
turbird77 Wrote:I'm very interested to know what all mods have been done to the motor? Smile

It is a .020 over shortblock. Diamond pistons, Total Seal rings, Crower rods, stock crank.
Top end consists of an Essy aluminum Dport head with a Boport stage three port job and solid roller stage 3 cam. Intakes are gutted/ported by 40bob with some additional work by Bo. SN95 5.0 throttle body.
Exhaust side consists of a ceramic coated Boport header, ebay 44mm external wastegate and Precision BB SC6262 turbo with .82 T3 hotside. Car has single 3 inch exhaust with 2 v-band clamps for easy disassembly with a Hooker Maxflo muffler dumped at the axle.
Fueling is a Wilson Racing MS setup running 95lb injectors and an Aeromotive Stealth 340lph pump. Also running a Coolingmist methanol injection setup.

That's the cliff's notes version. If you have any specific question, let me know.
88 TC#1 Boport stg 3 alum dport head, PT6466, Boport header, CP pistons, Crower rods, MS2xtra
88 TC#2 drag car project(someday)
88 TC#3 parts car (just needed the header panel...bought the whole car, lol)
Reply

TurboE Offline
Posting Freak
#8
Wow, thats awesome, be cool to see the 1/4 run!
-88 TC Black
5spd, Precision SC50 T3/T4, QH/SD Tune, Gillis, AFPR, 255FP, WB O2, K&N, Ported E6, 3" DP, ATR 2.5" Duals, 3:73 Rear, Konis, Eibachs, 18" Voxx Wheels, X Drilled Rotors.
-06 G35 Coupe Diamond Graphite
-97 Pathfinder
Reply

86XR7auto Offline
Moderator
#9
Hauling the mail..

Good job,

Travis
86XR7 in pieces...old time [email protected] http://www.youtube.com/watch?v=kGsz7PdEqTI 88TC stock Red RHSC [email protected], 01 Z71=Nice winter ride, 01 CVLX w/HPP wifes ride!
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB