North American Turbocoupe Organization



New 88 T/C Owner
Noname
Unregistered
#1
I just bought an 88 T/C 5 speed in Syracuse NY that is stock, excellant condition, never driven in the winter, and I love it. I would like to do some performance up grades [not too crazy]. I bought a K&N cone and would like to put a high performance exhaust in it but can't seem to find one. Also when I wind it out going thru the gears, when I shift I hear a noise like excess air blowing off thru the waste gate or something ??? Is this normal ? When I wind it out the boost is in the red area. Also where can I buy a service manual for this car. Thanks
Reply

JT Offline
Posting Freak
#2
Might check your connection of the intercooler. Make sure the hose from the turbo to the intercooler, and the hose from the intercooler to the throttle body, is nice and tight and that the hoses didnt "roll-up".

Common issue.

JT

------------------
JT
[email protected]
www.geocities.com/turbocpe/
1987 T-Bird Turbo Coupe T-5
1994 T-Bird LX 4.6L
1988 T-Bird Turbo Coupe A4LD
1988 T-Bird 3.8L
1979 T-Bird Heritage 351M
Reply

Pete D Offline
Administrator
#3
Welcome to the TC world. You can get service manuals through Helm Inc. Look for a number in th eback of your owner's manual. Read through the thread "Please Help a new TC owner" for the performance enhancing items.
If the car is running strong and you just put the K&N on you are probably getting normal turbo sounds that are not nearly as loud with the stock air filter system.The factory boost gauges are not known for great accuracy. As long as the overboost buzzer is not going off, don't worry about it. The only company making a bolt on performance exhaust system for TCs is Applied Technologies Research (ATR) 864-972-3800. There are some aftermarket Mustang systems that can be "adapted" and there is always the option of having a good shop bend one for you

------------------
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges. New engine shortly, ported head and
manifolds, polished and cc'd chambers, RR, Crowler, ARP head studs, Walbro 190 pump and T-3 for starters. KB subs
and jack rails
Pete Dunham


Reply

Noname
Unregistered
#4
Thanks for the info. I read all of the threads and its been a big help. Is there a low restriction muffler an cat that is better than others. I'm looking for the performance but I don't want it too loud. Thanks again.
Quote:Originally posted by Pete D:
Welcome to the TC world. You can get service manuals through Helm Inc. Look for a number in th eback of your owner's manual. Read through the thread "Please Help a new TC owner" for the performance enhancing items.
If the car is running strong and you just put the K&N on you are probably getting normal turbo sounds that are not nearly as loud with the stock air filter system.The factory boost gauges are not known for great accuracy. As long as the overboost buzzer is not going off, don't worry about it. The only company making a bolt on performance exhaust system for TCs is Applied Technologies Research (ATR) 864-972-3800. There are some aftermarket Mustang systems that can be "adapted" and there is always the option of having a good shop bend one for you

Reply

Gary S Offline
Administrator
#5
Pete and I are running just about the same set up on exhaust systems so if you would like a detailed description, drop me an e-mail at [email protected] and I'll send it along to you.
NATO Member
1987 Turbocoupe
168,000 Miles
5 Speed
Black w/Raven Interior
http://www.turbotbird.com/showroom/data_...t_87tc.php
Reply

Chris Ruhl Offline
Member
#6
I don't know much about the in the red turbo problem, but you can by a manual at Napa or AutoZone made by Haynes for $10-$15. I would take it to MufflerMan and tell them what kind of exhaust that you want. I would keep the 2 1/2 inch pipe from the manifold and from the cat back I would put a 2 1/4 inch Y-pipe with 2 1/4 inch pipes to 2 flowmaster 2 1/4 inch in and out mufflers, then 2 1/4 inch tail pipes.
Reply

Pete D Offline
Administrator
#7
Chris, I'm not trying to rain on your parade. It's just that Haynes and Chiltons don't have nearly the information that a set of the factory manuals along with th EVTM and the electrical diagrams have. The exhaust system sizes you mentioned are an improvement over the stock sizes but are not considered optimal. A 3" downpipe is far better. Dual 2.5" or a single 3" would be much better. Flowmasters are a chambered type muffler that deals with exhaust pulses very well. The turbo takes most of the pulses out such that Flowmasters tend toward the loud side on turbo cars. Some also feel that chambered type mufflers may be detrimental to performance. Straight through type mufflers are the preferred type on turbos.

------------------
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges. New engine shortly, ported head and
manifolds, polished and cc'd chambers, RR, Crowler, ARP head studs, Walbro 190 pump and T-3 for starters. KB subs
and jack rails
Pete Dunham


Reply

Jeff K Offline
Administrator
#8
I agree 100% with what Pete said....

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

Noname
Unregistered
#9
yeah flowmasters work but are not "Ideal" i like the flowmaster growl on mine i have a 3" system, and performance is much better than stock even with the flowmaster.

Best of luck,
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB