Bill.The.Pleaser
Joined:
Feb 2013
Dallas, TX
|
|
I'm trying to repair all the vacuum leaks on my '88 TC. I'm replacing the EGR and the brake booster, but I've also got considerable leakage going on at the throttle body. Is there any way to re-seal it, or am I just looking at a new throttle body? If I do in fact need a new throttle body, any ideas on where I can pick one up?
Thanks!
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
One guy sealed his up by having a throttle shaft "bushing" made and installed.
Pete Dunham
|
Jeff K
Joined:
Apr 2001
Milwaukee, WI
|
|
There are some "off the shelf" seals that can be used. There was a post over at turboford several years ago with the manufacturer and part number for the correct seals. Do a search over there.
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
|