North American Turbocoupe Organization



need tech info
cammed99 Offline
Member
#1
what is the technical name of the box that goes in the block that the pcv valve runs to? Mine was so corroded that when I took it out it got a good sized crack in it. Anyone know where I might find one of these or have a nice spare one they want to get rid of?

------------------
88 turbo coupe, 5 speed, stock with a gillis valve and 3 inch exhaust

4 other vehicles, all fords and all unique
89 TTA (yes the turbo one)
65 Mustang Fastback 2+2
98 GT
99 Ram 2500 4x4 Cummins on 35's
82 Bronco 4x4 FOR SALE
Reply

mmedic50 Offline
Senior Member
#2
OK, I'll take the first shot at this,, I think it is called an oil separator.
1988 TC 5 speed, Dark Blue
Build date 5/88.
140 mph Ford Motorsport Speedometer
Tripminder
Walbro 255 Fuel Pump
Kirban Adj. Fuel Pressure Regulator
K&N Air Filter
Gillis Boost Control Valve
New rebuild- .030 over pistons.
SS valves(1.89/1.59).
Center Force Stage II clutch.
ARP head studs.
Crane roller cam .450 lift.
Gutted upper and ported lower intake.
Ceramic coated and ported E6 exhaust.
Reply

Pete D Offline
Administrator
#3
Yep, oil seperator
Pete Dunham


Reply

cammed99 Offline
Member
#4
thanks guys, any ideas where to find one
89 TTA (yes the turbo one)
65 Mustang Fastback 2+2
98 GT
99 Ram 2500 4x4 Cummins on 35's
82 Bronco 4x4 FOR SALE
Reply

Jeff K Offline
Administrator
#5
They are obsolete from Ford. Maybe post in the Parts Wanted forum.... I am sure some one has one from a parts car. All there is inside is a series of metal plates, so if you find a used one, all you need to do is clean it out good, and put it on.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 21 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 02 Taurus Vulcan(wifes car)
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 24 psi, forced air IC, water injection, BPV, Ranger cam, subframes, etc., etc.
86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP N2O, ignition, gears, suspension, etc., etc.
11 Crown Vic Interceptor
14 Toyota Camry (wifes car)
95 Taurus GL Vulcan winter beater
67 Honda 450 Super Sport - completely customized
Reply

cammed99 Offline
Member
#6
are these on n/a motors or is it a turbo motor specific piece?
89 TTA (yes the turbo one)
65 Mustang Fastback 2+2
98 GT
99 Ram 2500 4x4 Cummins on 35's
82 Bronco 4x4 FOR SALE
Reply

phyxius Offline
Member
#7
i had to get one for mine once so i grabed one off a 2.3 ranger from a scrap yard
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB