|
I am about to tear down my 88 Turbocoupe's engine for a refreshing rebuild and need to know if anyone makes a re-ring kit (pistons are fine, don't need replacement) for my engine. I can perform all the work myself with the exception of machine work (if necessary). I need rings, all bearings, all gaskets, you know, the works, including an oil pump. Please let me know if you have a source.
Thanks
Philip Stocker
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
Phil I'm not sure anyplace really makes a all in one package but it isn't hard to get all the parts you need. Any spped shop or good machine shop can get you the stuff you need. I gotta ask: If you haven't torn it down yet, how do you know the pistons are fine or that it doesn't need an over bore?
Northern auto has rebuild kits but they don't come standard with forged pistons.
------------------
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
[This message has been edited by Pete D (edited 09-30-2001).]
Pete Dunham
|
DennySweet
Joined:
Apr 2001
Centreville,Michigan
|
|
Try Rockauto.com I think they have the rering kit!
88TC,87TC,,86S-10,82Toyota 4WD,3-88S-10Blazers.
|