DrPhang
Joined:
Apr 2001
Petersburg, Virginia,
|
|
Where can I find a new transmission input shaft bearing retainer? I went to autozone to try and find one but all I got a was funny looks. Can anyone hook me up with some part numbers or more info?
|
DrPhang
Joined:
Apr 2001
Petersburg, Virginia,
|
|
Oh by the way
"Also inspect the transmission input shaft bearing retainer for groves and score marks. It goes over the input shaft and bolts (4 bolts) to the front of the transmission. If it is groved or scored, replace it or you may have shifting problems." - Pete D
Before the motor was yoinked from the car it did want to be a pain to get into gear sometimes. I am going to replace is much as I can and I hope it should fix the prob.
Also while I am at it who makes decent aftermarket motor mounts for my 87TC? Can I just pick up whatever autozone has?
|
DrPhang
Joined:
Apr 2001
Petersburg, Virginia,
|
|
uhmmmm! I hate the fools at autozone! Wow I must be crazy I reply to my own posts. Oh well.
|
Pete D
Joined:
Apr 2001
Northern OH
|
|
You may be able to get the input shaft collar from Ford, not sure. The transmission shop that does my trannys always put a new one on. Try a trans shop. Sorry, I don't have a P/N
------------------
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham
|
Mr. Sam Ford
Joined:
Apr 2001
Richmond, VA
|
|
Adam, the bearing retainer is what you're talking about I believe, shaft that bolts onto the end of the transmission and goes out about 5" onto the input shaft right? Ford sells these, and there is an improved design available now that lasts better. Try your dealer
'88 Thunderbird TC, daily headache with a few mods, 14.65 and still not happy
'86 Mustang GT, daily transport, fresh 302, Twisted Wedge heads, Track Heat intake, custom cam, all the associated goodies, 4.10s, hoping for mid 12s n/a
|