| #1 |
I kicked the bird out of the garage as I sort out its idle problems (tired of pulling it out everytime I start it). While it was out I figured I may as well pull off the cover and snap some pix. I live on a dirt road (1 mile to pavement) so its hard to keep the car clean. Its also in need of a makeover (as you can see from the driver's side rear). Hopefully the weather will warm up soon so I can turn the garage into a body shop (wife's blessing!). One question - you can see its missing the window trim. My parts car is an '87, will the good trim from that work on my '88? I'll also be swapping glass - rear window (working defroster!)and windshield (no cracks!)
http://natomessageboard.com/uploads/0000...0_0772.jpg http://natomessageboard.com/uploads/0000...0_0773.jpg http://natomessageboard.com/uploads/0000...0_0770.jpg
http://natomessageboard.com/uploads/0000...0_0771.jpg
http://natomessageboard.com/uploads/0000...0_0772.jpg http://natomessageboard.com/uploads/0000...0_0773.jpg http://natomessageboard.com/uploads/0000...0_0770.jpg
http://natomessageboard.com/uploads/0000...0_0771.jpg
Project 13 sec. / 30mpg in '88 TC 5Speed : 15.91@89mph / 32+ mpg
On The Car: KN cone, 2-stage Gillis@ 15psi wired to fuel switch, Kirban AFPR @ 39psi, Walbro 255 HP FP, 130A 3G Alt., Full 3" Stinger Exhaust incl. cat. no muffler,
Shelf: .48 T3, ported E6, BPV
On The Car: KN cone, 2-stage Gillis@ 15psi wired to fuel switch, Kirban AFPR @ 39psi, Walbro 255 HP FP, 130A 3G Alt., Full 3" Stinger Exhaust incl. cat. no muffler,
Shelf: .48 T3, ported E6, BPV