Daniel
|
Joined:
Aug 2001
Carolina, Puerto Rico
|
|
Hello guys
Quick question will a mustang motorsport speedo work on a TC there is one on ebay going for (26.75)(The speedo 0-160mph)?
------------------
1987 tc Boost Valve,Kn Filter.Motorsport roller cam high rev springs,new prc shocks and springs.3'down pipe high flow cat walker turbo II mufflers 2 1/2 inch dual exhaust.
1987 tc Boost Valve,Kn Filter.Motorsport roller cam high rev springs,new prc shocks and springs.3'down pipe high flow cat walker turbo II mufflers 2 1/2 inch dual exhaust, center force II clutch
|
Pete D
|
Joined:
Apr 2001
Northern OH
|
|
No
------------------
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham
|
Wags88TC
|
Joined:
Apr 2001
Las Vegas
|
|
Not at all!!! I tried, mustangs are mechanical ours are electric. Unless you want to try and route a cable through the firewall and change the transmission!
Steve Wagner
Nato member
84 SVO
88TC, 5 speed, StageII Star clutch w/ StageIII pressure plate,lightened flywheel, K&N in fender, gillis valve, 255lph Walbro, Kirban adj.FPR,Bypass valve, 3" exhaust (high flow cat/ Magnaflow muffler), A-pillar gauges(A/F & Boost), 16" ARE 5 spoke wheels 7" front 8" rear(225/50VR16 / 245/50VR16 Yokos'). Subframe connectors
|
