Stan B.
Joined:
Dec 2005
Piqua, O.H. 45356
|
|
Looking for T5 driveshaft and crossmember for 88tc/in the middle of tranny swap.also if anyone has a more detailed description of what needes to be done as far as wiring. clutch switch/etc.Some of the past posts are just bits and pieces
88 Turbocoupe(maroon)Stock
96 gt mustang...CAI,Trickflow plenum,H-pipe,flowmasters,UDP,70mmTB,3.55gear
|
TurboT
Joined:
Aug 2002
Dickson City, Pa, USA
|
|
What aspect of the wiring are you doing with the clutch switch? Placement? or useablility? You can wire it into the wiring harness with a relay to prevent starting without the clutch being depressed, but you usually just wire into the neutral saftey switch on the automatic. Or just bypass the whole circuit completely with another secondary ground. Let me know what you need.
T.J.
FORCED INDUCTION RULES!!!
86 Turbo Cougar
Boost Valve, New Boost Gauge
FMIC, Finally new rear Rubber
Newer Stock Turbo @ 16psi
|
DonH
Joined:
Jun 2002
Central Massachusetts, USA
|
|
1987 TC stock except ATR 2.5"
1983 Pontiac Transam T-top 5.7 T56 [email protected] top speed: 176mph
1978 Fairmont 2.3 4-spd Big-top S/W
1946 Willys CJ2A 134.2ci L4 No-top
|