North American Turbocoupe Organization



misc
rv23tc Offline
Member
#1
where can i get a dual pod gauge pillar for my 88tc also would like to get a 140 speedo also need headlights anyone help???????? it would be greatly appreciated thanx

------------------
mods: 260 armstrong xp pump,430gears,,boost controller,FPR,9mm motorsport wires,K&N filter
Reply

Hybridbird Offline
Posting Freak
#2
If you get a dual pod for a 94 up Mustang it will be quite a nice fit,I as well as several others have done it already,works quite well.Headlights can still be had from the dealer brand new for about $45 bucks a piece,got them for both of mine,made a big differance.140 speedo?????Good luck just hve to keep your eyes (AND WALLET) open at e-bay and such.Hope some of this helps,later!

------------------
Too much fun, what's that mean?That's like too much boost,there's no such thing.
"Finch....get the f*ck away from that Ficus......that's a jizz-free Ficus!"
Reply

Pete D Offline
Administrator
#3
I can send you a short write up on installing the Autometer dual gauge pod The headlight lenses only (that's all you need) are p/n 13007 A & B. Don't let them sell you 13008 A&B - the whole assy @ $180+ each.



------------------
NATO Member
88 TC X 2, 86 SVO, Main TC with K&N, 3"DP to 2.5"duals through Dynamax, Ric valve at 17+ and disconnected KS.
Elite Bodega 16" chrome wheels. Autometer pod w/ A/F and Vac/boost gauges.140 mph Motorsports Speedo New engine: Total Seal rings and TRW pistons, ported and polished head w/ cc'd chambers,1.59"exhausts, SS valves, gutted upper, knife edged lower, A-230 cam, Race Engineering Adj Cam Sprocket, Crowlers, ARP head studs, and rod bolts. Walbro 255 HP pump and Kirban adj FPR, T-3. Centerforce II, KB subs and jack rails.
Pete Dunham


Reply

rv23tc Offline
Member
#4
yeah send me that im going to summit on sat.for that pod i thought a pod would work for an 89 but it doesn't so i have to take it back what size cam are most of u guys using???????? i found a spare head,T3

------------------
mods: 260 armstrong xp pump,430gears,,boost controller,FPR,9mm motorsport wires,K&N filter
Reply

tylerport Offline
Senior Member
#5
Eric (over at www.coolcats.net) is getting some full length A-pillars made with gauge pods in it. Check it out <a href="http://www.coolcats.net/pods/">here</a>.

------------------
Jim Portteus
86 Turbo Coupe, 131K Miles, 140MPH Speedo, Gillis Valve, 2 1/2" Downpipe to 2" Duals w/ 18" Glasspacks, 245/50R16's and new paint.
Jim Portteus
Reply

rv23tc Offline
Member
#6
thanx i'll look into that where did u get your 140 speedo????

------------------
mods: 260 armstrong xp pump,430gears,,boost controller,FPR,9mm motorsport wires,K&N filter
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB