North American Turbocoupe Organization



Meth injection
firstsvo Offline
Senior Member
#1
I bought a snow performance meth injection from a member I think here (or maybe TF) and I need a new nozzle. There are no markings on the one I have and the threads are a mess. Being they are $25.00 each, does anybody have any experience with these as to which size may be the best to at least get started? There are six of them ranging from 60/ml/min all the way up to 625ml/min. Any clues would be helpful. All I remember was him saying it was a "smaller" one. I think. lol. Thanks... Chuck
White '88 auto mostly stock, Black '88 5 speed nowhere near stock
Reply

Tom Senior Offline
Banned
#2
Mine is .030 on my TC 2.3 Smile
Reply

firstsvo Offline
Senior Member
#3
Any idea what that is in their measure? There's a local machine shop here. Maybe they have a precision pin set to check it. I guess snow performance can go by that. I'm thinking this is the smallest jet. Can't imagine a whole much smaller. lol.
White '88 auto mostly stock, Black '88 5 speed nowhere near stock
Reply

Tom Senior Offline
Banned
#4
Mine is marked. Maybe you can use a small drill bit to see what the size it is. Smile Wink
Reply

86XR7auto Offline
Moderator
#5
$25.00 wow.... I would like to see a picture of that piece of brass. www.smcenterprises.com is super good guy to deal with. His fittings are cheap.

Travis

ie if they are the same....just order from him. $5.00 a piece last time I checked.
86XR7 in pieces...old time [email protected] http://www.youtube.com/watch?v=kGsz7PdEqTI 88TC stock Red RHSC [email protected], 01 Z71=Nice winter ride, 01 CVLX w/HPP wifes ride!
Reply

firstsvo Offline
Senior Member
#6
Scroll to the bottom of their page for the pricing. I'll try calling SMC and see if theirs will fit. Looks different in the pics and I can't find the nozzles listed seperately. I'll look again.

http://www.snowperformance.net/product.php?pk=23
White '88 auto mostly stock, Black '88 5 speed nowhere near stock
Reply

xcrunnerbd Offline
Posting Freak
#7
Try nozzles from McMaster Carr too. Something like $3-4.
Project 13 sec. / 30mpg in '88 TC 5Speed : 15.91@89mph / 32+ mpg

On The Car: KN cone, 2-stage Gillis@ 15psi wired to fuel switch, Kirban AFPR @ 39psi, Walbro 255 HP FP, 130A 3G Alt., Full 3" Stinger Exhaust incl. cat. no muffler,

Shelf: .48 T3, ported E6, BPV
Reply

86XR7auto Offline
Moderator
#8
Same idea as www.smcenterprises.com but its a slightly different setup. You probably could get a whole new end and hose and test it out. Might end up being a similar price.

Good luck,

Travis
86XR7 in pieces...old time [email protected] http://www.youtube.com/watch?v=kGsz7PdEqTI 88TC stock Red RHSC [email protected], 01 Z71=Nice winter ride, 01 CVLX w/HPP wifes ride!
Reply





Users browsing this thread:
1 Guest(s)



Theme © iAndrew 2018 - Software MyBB